Pronomic LS-210 Quick Start Manual page 2

Pronomic Laptop Stativ LS-210
Artikel: 00032124
Place one top side part (1) and one side leg (2) on top of each other. By choosing the
holes you can adjust total height of stand. Fix both parts with screws (3) and distance poles (4).
To adjust total width of stand you can use poles (5). Before you fix lower screws mount
middle rack (10). Repeat this steps for opposite top part and side leg. You can use the
laptop stand with additional ground plates (6) or clamps (7) to fix the stand on a table top.
Fix ground plates or clamp with screws and washers (8) at laptop legs.
You can attach self sticking rubber pads (9) on ground plates or clamps to protect
table surface and avoid scratches.