Advertisement
Quick Links
Fisher Engineering
50 Gordon Drive, Rockland, Maine 04841-2139 • www.fi sherplows.com
Walk-Behind Drop Spreader
Owner's Manual and Installation Instructions
Read this document before operating or
servicing the spreader.
This document is for FISHER
with serial numbers beginning with 0000 and higher.
This document supersedes all editions with an earlier date.
WB-160D
Original Instructions
CAUTION
WB-160D walk-behind drop spreaders
®
85202
February 1, 2019
Lit. No. 43585, Rev. 02
Advertisement
Related Manuals for Fisher Engineering WB-160D
Summary of Contents for Fisher Engineering WB-160D
- Page 1 Owner's Manual and Installation Instructions Original Instructions CAUTION Read this document before operating or servicing the spreader. This document is for FISHER WB-160D walk-behind drop spreaders ® with serial numbers beginning with 0000 and higher. This document supersedes all editions with an earlier date.
- Page 2 Lit. No. 43575/43585/43595, Rev. 02 February 1, 2019...
-
Page 3: Table Of Contents
TABLE OF CONTENTS PREFACE .................................. 5 Owner's Information Form ..........................5 SAFETY ..................................6 LOADING .................................. 8 ASSEMBLY ................................9 OPERATION ................................10 Lit. No. 43575/43585/43595, Rev. 02 February 1, 2019... - Page 4 Lit. No. 43575/43585/43595, Rev. 02 February 1, 2019...
-
Page 5: Preface
PREFACE This manual has been prepared to acquaint you with When service is necessary, bring your walk-behind the safety information, operation, and maintenance spreader to your distributor. They know your spreader of your new walk-behind spreader. Please read this best and are interested in your complete satisfaction. manual carefully and follow all recommendations. -
Page 6: Safety
SAFETY SAFETY DEFINITIONS LABELS Please become familiar with the labels on the WARNING spreader. Indicates a potentially hazardous situation that, if not avoided, could result in death or NOTE: If labels are missing or cannot be read, see serious personal injury. your sales outlet. - Page 7 SAFETY SAFETY PRECAUTIONS PERSONAL SAFETY Improper installation and operation could cause • Wear only snug-fi tting clothing while working on personal injury and/or equipment and property your spreader. damage. Read and understand labels and this • Do not wear jewelry or a necktie, and secure long Owner's Manual before assembling, operating, or hair.
-
Page 8: Loading
LOADING LOADING YOUR SPREADER WARNING Never remove spreader from vehicle with WARNING material in it as this could cause damage to the frame assembly. Do not overload spreader. Use chart below to calculate weight of material. Weights of material are an average for dry materials. CAUTION DO NOT leave unused material in Material Weights... -
Page 9: Assembly
ASSEMBLY ASSEMBLING YOUR SPREADER 3. Insert the actuator rod through the main frame while sliding the upper push spreader handle WARNING assembly down onto the main frame. Fasten with 1/4" x 1-3/8" cap screws and 1/4" locknuts. Use safety glasses and gloves when infl ating and installing the tires. -
Page 10: Operation
OPERATION ADJUSTING MATERIAL FLOW The rate of material fl ow on your drop spreader may be adjusted for your specifi c material and usage by using the calibration cam on the main frame. 1. Loosen the black knob and toothed washer. Toothed Washer 2. - Page 12 Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. Fisher Engineering offers a limited warranty for all spreaders and accessories.
Need help?
Do you have a question about the WB-160D and is the answer not in the manual?
Questions and answers