Buhl PLCAB4226E Instruction Sheet

Instruction sheet -- Buhl Flat panel TV cart
Model number: PLCAB4226E
Congratulations for having chosen this excellent Buhl product.
To assure your complete satisfaction, this product is warranted against defect in
manufacture for one year after the purchase date. Any parts requiring replacement
during the 1--year period, under normal use and service, as a result of defective
workmanship, will be replaced by Buhl or by an authorized Buhl dealer, without cost,
except for transportation charges. All unit should be returnd in original packing, to
guarantee safe transport. Buhl is not responsible for damage in shipment.
Note: This unit is easier to assemble with two people.
Parts list
Qty. Description
1 Top shelf
4 Top legs
1 Bottom shelf section
2 Poles for supporting flat panel TV
2 Horizontal mount
1 Electrical bracket
1 Power cord
3 Screws and hex nuts(E)
1 Cart handle (Optional)
Pole
1.
Insert top legs onto top shelf. Tighten top legs with screws,
washer and nuts (see screw table K) as shown.
3.
Align corresponding holes of unit to obtain desired height of
table as needed.
Qty. Description
9 Set Phillips head bolt, washer and hex nut(I)
8 Set Screw and serrated nut (K)
2 Casters with brakes
2 Casters without brakes
2 Security screws for mounting the poles (F)
2 Security screw (G)
2 Hex head screw (H)
2 Set Pull out shelf
Horizontal mount
( Instructions continued on next page )
Screw table
Some screws may have already been
screwed on the related parts.
2.
Insert top table section onto bottom section.
4.
Insert two bolts, washer and nuts (see screw table I) into each leg
of table. Washer should be on the inside of leg. Tighten all bolts
and nuts.
PLCAB4226E with handle
Tools required
L key (provided)
Adjustable wrench/pliers
Rubber mallet
Page 1