Table of Contents
Advertisement
Handling the appliance
Putting it into use
Place the accessories into the appliance then plug to
the mains socket.
The thermostat knob is on the light box in the
refrigerator. You can switch the appliance on and set
the temperature with it by turning the knob clockwise.
The next paragraph will give instructions for setting.
Controlling the temperature, setting
The thermostat interrupts the operation of the
appliance automatically for more or less time
depending on the setting then restarts it assuring the
required temperature.
The closer it is set to maximum position the more
intensive the refrigerating will be. When the thermostat
knob is set to a medium position (between minimum
and maximum), in the freezing compartment -18 °C, in
the fresh food compartment +5 °C can be reached.
Setting it to a medium position is adequate for
everyday use.
The temperature coming about in the refrigerator is
effected by not only the position of the thermostat but
the ambient temperature, frequency of door openings
and the quantity of food put into it newly, etc.
In the maximum position - in case of
increased demand e.g. during heatwaves -
the compressor may operate continually. This
does not cause damages to the appliance.
How to use the refrigerator
For adequate cooling developing interior air
circulation is necessary. For this reason you are
asked not to cover the air circulation gaps behind the
shelves (e.g. with tray etc.).
Do not put hot food into the refrigerator.
Allow it to reach room temperature naturally.
In this way the unnecessary frost building up can
be avoided.
Foods can take over odours from each
other. So it is essential to put foods in closed
dishes or wrap them in cellophane, aluminium
foil, grease-proof paper or cling film before
placing them into the refrigerator. This way foods
will keep their moisture e.g. vegetables will not
dry out after some days.
6
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
