Advertisement
COMPONENTS AND USE INSTRUCTIONS
HANDLE
After releasing clips, vacuum
head can be lifted off of the
unit by the handle.
SWITCH
"o" represents power off
"-" represents power on.
CORD STORAGE
power cord can be
conveniently stored in
the indicated location.
CLIPS
Press clips inward
to release head
from vacuum body.
CONNECTION
Insert hose connector
into the suction mouth,
and rotate about 90°
to lock tightly.
BLOWING
FUNCTION
Connect hose into
indicated mouth and
tighten. Make sure that
hose is clear of
blockages before
attempting to use
this function.
TUBE
Put the tube assembly
here for next use.
INSTRUCTION MANUAL • 2
Advertisement
