Subscribe to Our Youtube Channel
Related Manuals for Clinton 85100
Summary of Contents for Clinton 85100
- Page 1 Examine Real Quality & Value ™ OPERATION, CARE & MAINTENANCE POWER IMAGING TABLES Models 85100, 85200, 85300 & 85309 Model 85300 Model 85100 Model 85200 Model 85309...
- Page 2 Thank you, for selecting and purchasing quality Clinton equipment. We are proud to serve your medical equipment needs with products that deliver value and offer superior performance. Please read these instructions carefully to insure your Clinton products are used and operated according to specifications and that they are maintained to Clinton’s recommendations.
- Page 3 Use only mild cleaning agents on upholstery. Clinton recommends using a 1 to 1 mix of ammonia and water or a 1 to 4 mix of bleach and water, rinse thoroughly with clean water and pat surface dry.
- Page 4 ADJUSTMENTS (continued) BACKREST CYLINDER REPLACEMENT (models 85200, 85300 & 85309 only) The backrest cylinder is replaceable in the field by following these simple directions below. Cylinder Pin Remove cotter pin. Then remove Align holes in cylinder bracket with holes in table bracket by adjusting Finished view of cylinder assembly.
- Page 5 ADJUSTMENTS (continued) (models 85300 & 85309 only) FOOT DROP SECTION The Foot drop section is located at the foot-end of the table and is shown below at left in a semi-extended position. The foot drop section can be raised and lowered using the foot drop section levers on either side of the table.
- Page 6 ADJUSTMENTS (continued) OPTIONAL LOCKING CASTERS (all models) Locking casters are an option on all models. The locking mechanism can be engaged by using your foot to depressing the tab located at the rear of each caster. This locks the swivel of the caster and acts as a brake to minimize movement of the wheel.
- Page 7 Check to make certain foot pedal cord is properly and securely plugged into motor. If after checking all these areas, the table will not operate, or operates improperly, call a technician, or call Clinton Industries at 800-441-9131 for assistance.
- Page 8 © Copyright 2012, Clinton Industries, Inc.
Need help?
Do you have a question about the 85100 and is the answer not in the manual?
Questions and answers