Advertisement
INSTALLATION
1.
Locate top side of adapter for each size listed below.
(EVU8 THRU 11, 13, 16 DIRECT DRIVE)
(ALL OTHER SIZES)
2.
Install bolts threads up on top side.
3.
Apply gasket to surface as shown.
P.O. Box 1592, York, Pennsylvania USA 17405-1592
Copyright © by Johnson Controls 2015
Revised: 08/24/15
2
4. Attach adapter securely to wall. (Fasteners not included.
5. Hang fan from top bolts as shown; secure to wall adapter
Tele. 800-861-1001
www.york.com
For Product Warranty Support and Parts call 814-479-4005
Depending on wall construction, this is to be attached at
discretion of the installer.)
INSTALL BOLTS FROM INSIDE ON TOP
ANGLE TO HANG WALL ADAPTER
SOME MODELS DO NOT
CONTAIN COOLING TUBE
DRAIN SPOUT FACES DOWN
with remaining bolts.
Subject to change without notice. Printed in USA
ALL RIGHTS RESERVED
JOHNSON CONTROLS
Advertisement
