Page 1
Set up and use your Studio Wireless headphones 1. Turn your headphones on or off Press and hold the power button for 1 second.
Page 2
2. Pair your headphones If you turn your headphones on and the indicator light turns on but doesn't flash, your headphones are already paired with a device. In that case, follow the steps to connect to a different device. Pair with an iPhone that uses iOS 11 or later 1.
Page 3
3. Connect to a different Apple device Your headphones automatically reconnect to the last device you used with them. To connect to another device, follow these steps. Connect your headphones to your iPhone, iPad, or iPod touch 1. Go to Settings > Bluetooth. 2.
Page 4
3. Go to the Bluetooth settings on your device. For example, on your Mac, click the Bluetooth icon in the menu bar. 4. Select your headphones from the list of Bluetooth devices. If you don't see your headphones in the list, press and hold the power button on your headphones for 5 seconds.
Page 5
Check how much charge your headphones have To check the battery level, make sure your headphones are turned on, then tap the power button on your headphones and watch the five Fuel Gauge lights on the right earcup. Use your headphones Learn how to play music, change the volume, use Siri, answer calls, and cancel noise.
Page 6
Answer calls Use the b button on the left earcup, or use the center button on the RemoteTalk cable. To answer or end a call, press once. To answer a second incoming call and put the first call on hold, press once. When two calls are active, this switches between calls.
Page 7
If you can't connect to your wireless Beats product 1. Check the location Place your Beats product and your paired device within 30 feet of each other. Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics.
Page 8
Check the volume 1. Make sure that both your Beats product and your Bluetooth device are charged and turned on. 2. Play a track that you downloaded to your device, not streaming audio. 3. Increase the volume on your Beats product and on the paired Bluetooth device.
Page 9
Make sure the straight-end of the plug is connected to the headphones and the angled L-shaped plug is connected to the audio source. If you're using your Beats with a computer, make sure that your computer microphone is set to the correct input source.
Need help?
Do you have a question about the Studio3 and is the answer not in the manual?
Questions and answers