Page 6
Using Your Energy Fitness Tracker 1. Remove the Energy Fitness Tracker EFT1 from the packaging and charge the battery using the supplied USB cable. The LED indicator will remain on during the charging process and switch off when the battery is fully charged.
Page 7
Using Your Energy Fitness Tracker Note the following when placing the EFT1 onto your arm:- * Ideally, the EFT1 should be worn on the left arm just above the elbow. * The EFT1 uses reflected light to measure your heart beat. Body hair will obstruct this light so always place the EFT1 onto the arm where there is little or no body hair.
Page 8
Using Your Energy Fitness Tracker 6. Pair the EFT1 with the iOS device as follows (first time use only): a. Press and hold the button in the centre of the EFT1 until the LED blinks rapidly. b. Press the Bluetooth icon on the bottom of the screen. Once the EFT1 is paired with the iOS device, the app will return to the homepage.
Page 9
Explanation of Symbols on the App EFT1 signal strength Real time pulse indicator Heart rate (Beats Per Minute) Time Distance Speed GPS signal indicator Battery indicator 3D sensor...
Page 10
Explanation of Symbols on the App Fat Burning Zone...
Page 11
Explanation of Symbols on the App Heart rate (Beats Per Minute) Speed Distance Calorie Graph Start Time Session duration Press for AVG, MIN & MAX...
Page 14
Specifications Physical Dimensions: 54mm(L) × 54mm(W) × 14mm(H) Operating Temp: 10°C to 40°C Operating Humidity: 20% RH to 85% RH Non-condensing Storage Temp: -5°C to 50°C Storage Humidity: 15% RH to 95% RH Non-condensing Readable Heart Rate Range: 40 to 220 ± 10% of bpm Automatic Power-off: 3 min without any activity Min Recommended Wrist Size:...
Page 15
Troubleshooting Most problems can be resolved simply by clearing the app from the iOS memory and switching off the EFT1 before restarting both the EFT1 and the app (in that order). If this does not clear the problem, connecting the EFT1 to a USB charger using the supplied cable will perform a software reset on the EFT1.
Page 16
Troubleshooting EFT1 will not detect a heart rate. Ensure the sensors are clean and free from dirt. Ensure the EFT1 is placed so that body hair does not block the light from the sensors. Try placing the EFT1 in different locations (such as the wrist, forearm, bicep area).
Page 30
Customer Feedback kinetikmedical.com to leave your feedback. Warranty...
Page 31
Explanation of symbols on the Unit Symbol for "Environment Protection" – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice. Symbol for “Manufacturer”. This product complies with European Directives.
Need help?
Do you have a question about the Energy Fitness Tracker and is the answer not in the manual?
Questions and answers