Page 1
4 LITRE MANUAL BRAKE BLEEDER AND UNIVERSAL ADAPTOR MODEL NO: CHT857 & CHT858 PART NO: 1801857 & 1801858 OPERATING INSTRUCTIONS GC0516...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE Brake Bleeder. The CHT857 clutch & brake bleeding kit is designed for one-man operation requiring no external power source, The user has to only fill the reservoir and pump the handle. The reservoir capacity of 4 ltr enables an entire system flush in one fill, without the risk of running the reservoir dry.
Page 3
2. Never use this product if any part is damaged. Have it inspected and repaired by your local Clarke dealer. 3. Never modify or tamper with this product in any way. Use it only for the purpose for which it is designed.
Page 4
12. Always comply with all local authority regulations when disposing of any type of used fluid. 13. Always have the unit repaired by your local CLARKE dealer, using only identical replacement parts. This will ensure the safety of the unit is maintained.
Page 5
OVERVIEW OF CHT857 & CHT858 Fluid Container Tensioning Nut Container Hose Adaptor Hose Hand Pump Chain Pressure gauge “J” Hook Pressure Release Valve Bleeder Cap (44 mm) Container Cap Quick-release Coupling Reservoir Adaptor CONNECTION & OPERATION CAUTION: BRAKE FLUID IS CORROSIVE. IN THE EVENT OF FLUID SPILLAGE, CLEAN UP &...
Page 6
CHT857 BRAKE BLEEDER 1. Ensure that the brake bleeder is clean and free from old brake fluid. 2. Remove the hydraulic fluid reservoir cap from the vehicle. If old fluid is contaminated, drain it off and refill the system with fresh fluid.
Page 7
15. Carefully check for leaks and test for proper brake operation before driving the vehicle, CHT858 RESERVOIR ADAPTER If the 44mm bleeder cap (12) does not fit the vehicle hydraulic reservoir, the CHT858 adaptor will be required. 1. Fit the reservoir adapter over the reservoir filler neck. 2.
Need help?
Do you have a question about the CHT857 and is the answer not in the manual?
Questions and answers