Mechanical Instructions - Philips 37PF9631D/37 Service Manual

EN 8 4. EJ2.0U LA

4. Mechanical Instructions

Index of this chapter:
4.1 Cable Dressing
4.2 Service Positions
4.3 Assy/Panel Removal
4.4 Set Re-assembly
4.1 Cable Dressing
4.2 Service Positions
For easy servicing of this set, there are a few possibilities
created:
• Foam bars (created for Service).
• Aluminium service stands (created for Service).
4.2.1 Foam Bars
Figure 4-2 Foam bars
Mechanical Instructions
Figure 4-1 Cable dressing
4.2.2
E_06532_018.eps
170504
Notes:
• Several models in this chassis range have a different
mechanical construction, the instructions given in this
chapter are therefore very model specific.
• Figures below can deviate slightly from the actual situation,
due to the different set executions.
• Follow the disassemble instructions in described order.
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
face down on the (ESD protective) foam bars, a stable situation
is created to perform measurements and alignments.
By placing a mirror under the TV, you can monitor the screen.
Aluminium Stands
Figure 4-3 Aluminium stands (drawing of MkI)
G_16290_091.eps
030206
E_06532_019.eps
170504