Table of Contents
Advertisement
R820/R420
MANUAL
THIS MANUAL CONTAINS IMPORTANT AND SAFETY-
RELATED INFORMATION FOR SETTING UP AND
OPERATING THE PRODUCT.
READ THROUGH THE MANUAL CAREFULLY AND EN-
SURE THAT YOU HAVE FULLY UNDERSTOOD THE
CONTENTS, BEFORE YOU INSTALL, SET UP AND / OR
OPERATE THE PRODUCT FOR THE FIRST TIME.
ENGLISH
V02/2020
Advertisement
Table of Contents
Summary of Contents for Icarus Blue R820
- Page 1 R820/R420 MANUAL THIS MANUAL CONTAINS IMPORTANT AND SAFETY- RELATED INFORMATION FOR SETTING UP AND OPERATING THE PRODUCT. READ THROUGH THE MANUAL CAREFULLY AND EN- SURE THAT YOU HAVE FULLY UNDERSTOOD THE CONTENTS, BEFORE YOU INSTALL, SET UP AND / OR OPERATE THE PRODUCT FOR THE FIRST TIME.
-
Page 2: General Information
This manual contains important safety-related information for set- of fire or explosion. ting up and operating the ICARUS blue R820 and R420 receiver • Do not use the receiver if it is damaged. This could lead to (called “the receiver” in the following). R820/R420 is a B2B product damage to objects or injuries. - Page 3 • When installing / mounting the receiver, ensure that the connec- tion cables are not crushed, kinked or otherwise damaged (e.g. by sharp edges). • ICARUS blue R820 (receiver) • Contact an expert if you have any questions about the operation, • 12-wire connection cable (length: 1.5m) safety or setting up of the receiver.
-
Page 4: Table Of Contents
TABLE OF CONTENTS 1. MANUFACTURER’S INFORMATION GENERAL INFORMATION ICARUS blue® is a product series of the ICP Group, which is produced and licensed by ICP Systems b.v., Handelsweg 48, 7451PJ Holten, SAFETY REGULATIONS The Netherlands. The ICARUS blue® word mark is a registered brand... -
Page 5: Technical Data And Requirements
2.2 TECHNICAL DATA AND REQUIREMENTS 2.3 RECEIVER VIEW (WITHOUT PROTECTIVE COVER) Frequency 2.4 GHz (Bluetooth 5.0) Antenna internal Transmission power +8dBm Working range approx. 100m, depending on the en- (control by TM600) vironment Working range approx. 30m, depending on the environ- (control by app) ment and device MOUNTING... -
Page 6: Status Led
3. INSTALLATION REQUIREMENTS 2.5 STATUS LED WARNING Slow flashing Installation, mounting, setting up and operation of the receiver when tired or under the influence of drugs or medicines Normal flashing is strictly prohibited. Follow the safety instructions! Fast flashing • The receiver may only be installed, mounted, set up and oper- Continuously on ated by qualified skilled personnel. -
Page 7: Connecting The Cable
• The receiver must be fixed with two screws (M5). 1. Connect the loose end of the black wire of the receiver cable to • Always observe the relevant safety instructions. ground (0 Vdc). 2. Connect the loose end of the grey wires (1 – 8; outputs 1 – 8) of 4. -
Page 8: Coupling A Transmitter / Smartphone (Pairing)
2. Press button 1 on the receiver 3 x quickly. 3. The status LED starts to flash alternately red and green. 4. Now activate the pairing mode of the ICARUS blue transmitter that is to be coupled. Please read the corresponding manual. -
Page 9: Error Codes And Remedy
6. ERROR CODES AND REMEDY Flashing Error Solution sequence 1 x long, Receiver output 6 Check and reduce the current In the event of system malfunctions, the error that has occurred 6 x short (> 3.5A for > 1000ms) consumption of the connected is given by a flashing sequence (see “LED status”... -
Page 10: Maintenance And Cleaning
ICP Systems B.V. (Handelsweg 48, 7451 PJ Holten, The Netherlands) herewith declares that the radio system types ICARUS blue R820 9. WARRANTY and R420 comply with Directive 2014/53/EU. - Page 11 ICP Systems B.V. Handelsweg 48, 7451 PJ Holten, The Netherlands www.icarus-blue.com...