iiNet BizPhone Quick Setup Manual

Quick Setup Guide
iiNet BizPhone Cordless Handset
1 Packaging Contents
Handset
Ethernet Cable
2 Assembling the Phone
1 Connect the network and power for the base station in one of
the following ways:
LAN
AC Power Option
2
Peel and lift the back cover and insert the battery into the handset.
Peel and
lift Cover
3 Start up the Phone
The handset is pre-configured to the Base Station. Once the handset is connected to your network
and power, it will automatically start to set itself up by connecting to the iiNet BizPhone servers and
collecting necessary configuration details and updates. This may take up to 10 minutes.
The LCD screen on the handset will indicate the status of the update process.
The phone may reboot multiple times during this process.
Base Station
Belt Clip
PoE
PoE (Power Over Ethernet) Option
Remove Insert
Cover Battery
USB Charger
Base Stand
Cradle
Rechargeable
Battery
3
Replace Cover
2 Power
Adapters
Handset Protective
Case (Optional)
Connect the charger cradle
and charge the handset.
Note: The handset should be
used with original power adapter
(5V/500Ma) only. Third-party power
adapters may cause damage to the
handset. The charging status of the
handset is indicated in the top right
corner of the LCD screen.