Operation ......................... 7 Specifications ......................8 Maintenance ......................8 Warranty........................9 EU Declaration of conformity .................. 10 About this edition of operating manual The current edition of operating manual applies to the following version of mini-shaker for immunology: PSU-2T V.2AW...
Safety Precautions The following symbols mean: Caution! Make sure you have fully read and understood the present Manual before using the equipment. Please pay special attention to sections marked by this symbol. GENERAL SAFETY Save the unit from shocks or falling. ...
General Information PSU-2T Mini-shaker provides regulated shaking for two or four 96-well microtest plates. It is a compact instrument with low profile and small footprint for personal application including immunoassays and colouration tests. The current upgraded model provides reliable continuous operation and smooth platform motion at lower speed.
Operation 5.1. Connect the external power supply to the mains. 5.2. Place the microtest plates on the platform and fix them with the two screws. When using the IPP-4 platform, fix the microtest plates with the special holder by pressing it against the microtest plates with two screws.
80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C. Biosan is committed to a continuous programme of improvement and reserves the right to alter design and specifications of the equipment without additional notice.
To obtain the claim form, visit section Technical support on our website at link below. 8.5. Extended warranty. For PSU-2T, the Basic Plus class model, extended warranty is a paid service. Contact your local Biosan representative or our service department through the Technical support section on our website at the link below.
EU Declaration of conformity Unit type Rockers, shakers, rotators, vortexes Models MR-1, MR-12; 3D, Multi Bio 3D, PSU-10i, PSU-20i, MPS-1, PSU-2T; Bio RS-24, Multi Bio RS-24, Multi RS-60; V-1 plus, V-32, MSV-3500 Serial number 14 digits styled XXXXXXYYMMZZZZ, where XXXXXX is model code, YY and MM –...
Need help?
Do you have a question about the PSU-2T and is the answer not in the manual?
Questions and answers