Installing The Tv To The Wall - Sony BRAVIA XBR-65A8H Reference Manual

Installing the TV to the Wall

Using the optional Wall-Mount Bracket
(SU-WL855 only)* (not supplied)
To Customers:
For product protection and safety reasons,
Sony strongly recommends that installation
of your TV be performed by Sony dealers or
licensed contractors. Do not attempt to
install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the
installation, periodic maintenance and
examination of this product.
Wall-Mount Bracket Installation
Information
This TV's instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
For instructions on Wall-Mount Bracket
installation, see the Installation Information
(Wall-Mount Bracket) on the Sony Customer
Support website for your TV model at the
following address.
https://www.sony.com/am/support
Preparing for Wall-Mount Installation
• Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• Be sure to entrust the attachment of this
product to the wall to Sony dealers or
licensed contractors and pay adequate
attention to safety during the installation.
Sony is not liable for any damage or injury
caused by mishandling or improper
installation.
8
US
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
9 mm – 13 mm
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied Safety Booklet for additional
safety information.
* Only on limited region/country/TV model.
Installing the TV to the Wall from Carton
1
Remove the center cushion.
Screw (M6)
Wall-Mount Bracket
TV's rear cover