The Dynavoice CSB-V type subwoofers are equipped with a front firing slot type bass reflex port, place this facing away from any walls or obstacles, this applies for all the examples that follow.
Hi-Fi Stereo Systems (RCA connection) Use a RCA signal cable between the Sub pre-out L/R and the subwoofer L/R input. If your Proces- sor/Pre-Amp/Receiver has a single Sub pre-out use a RCA Y-split signal cable. If your Processor/Pre-Amp/Receiver has a 12V trigger output, use a 3.5mm mono cable between the output and the Trigger 12V input on the subwoofer.
Need help?
Do you have a question about the CSB-V12 and is the answer not in the manual?
Questions and answers