Specify Ipv6 Internet Connections - NETGEAR Nighthawk AX8 User Manual

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d. Select Internet.
The Internet Setup page displays.
e. In the WAN Preference section, select the Multi-Gig Internet (1 Gbps + 1 Gbps)
radio button.
f. Click the Apply button.
Your settings are saved.
3. Connect the Internet port and Ethernet port 4 on your router to two Ethernet ports
on your modem.

Specify IPv6 Internet connections

You can set up an IPv6 Internet connection if the router does not detect it automatically.
To set up an IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select the IPv6 connection type:
• If you are not sure, select Auto Detect so that the router detects the IPv6 type
that is in use.
• If your Internet connection does not use PPPoe or DHCP, or is not fixed, but is
IPv6, select Auto Config.
Your Internet service provider (ISP) can provide this information.
6. Click the Apply button.
Your settings are saved.
Specify Your Internet Settings
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router
30 User Manual