Table of Contents
Advertisement
Symptom
No playback.
Old messages still
present after
re-recording.
Playback stops part way
through a message.
Toy doesn't turn on with
message
External switch does not
play message
Mechanical noises on
recording
Possible Cause
•
No messages
recorded!
•
Volume control
turned right down.
•
Battery flat.
•
In Q&A mode, first
question must
be played using
external switch
before answer can
be played on main
switch.
•
Erase not pressed
prior to recording.
•
Battery flat.
•
Toy not assigned to
this message
•
Toy lead broken
•
SimplyWorks receiver
not paired
•
Wired switch broken
•
SimplyWorks switch
not paired
•
Not your turn in
Converse mode
•
Unit was held in hand
whilst recording
Troubleshooting
Remedy
•
Record some messages!
•
Turn volume up.
•
Recharge battery.
•
Play first question using
external switch before
answer may be heard on
main switch.
•
Press Erase before
recording if you want to
remove old messages.
•
Recharge battery (short term
fix- turn volume down)
•
Re-record and press Record
to assign
•
Test and replace if necessary
•
Pair up receiver
•
Test with Pretorian Test-IT
and replace if necessary
•
Pair up transmitter
•
Wait until it's your turn
•
Place on a firm surface when
recording
Advertisement
Table of Contents
