Changing Ac Mains - Hitachi E-Compact Medium Power Series Operation Manual

6.5.4. Changing AC Mains

Once the mains power is set at the factory, there is the possibility to change its input type feature for the
following cases:
AC Main Factory Set
M208
B240
For Not Available cases, it is necessary to replace the complete AC Mains Module
for the compatible electrical grid. Contact Hitachi Kokusai Linear Service.
When replacing the AC Mains type, pay attention to circuit breakers, varistors and
sparklers models for their characteristics. Each type of AC Mains uses different
values of these protection components.
Using these protection components outside the features described in this manual
may cause damage to the equipment.
Setup Change Possibility
M208
Factory Set
USE M220 Setup
See 6.5.2
B240
USE B220 Setup
See 6.5.3
Factory Set
E-Compact Medium Power
T208 / T240
Not Available
Not Available
T380
Not Available
Not Available
66 | 106