Page 1
CBS ArcSafe® RSA-161A (Schneider Class 9421 Type L Mechanism - 3" Handle Assembly) CBS ArcSafe, Inc. 2616 Sirius Road Denton, TX 76208 (940) 382-4411 www.cbsarcsafe.com...
DANGER! Ensure that the equipment to be remotely operated matches the equipment shown and described on the cover page. If the equipment does not match, please contact CBS ArcSafe® for more information regarding remote operating applications for the equipment in question.
Page 3
Step 4: Now, secure the RSA-161A into place using the twist lock magnet. Rotate the handle of the magnet 180° clockwise to engage the magnet and secure the RSA-161A to the equipment. Step 5: Next, find a suitable place to mount the motor control box. The motor control box is mounted using the magnet on the underside of the box.
Page 4
ATTENTION! The location of certain items such as mimic bus, stickers, and/or placards may interfere with the installation of the remote operating equipment. These items may need to be removed or repositioned for proper installation. Step 6: Lastly, ensure that the device is setup as shown in the image on the following page. If everything is setup as described above and shown in the image, then the RSA-161A is ready to operate.
2.0 Operation Step 1: Ensure that the RSA-161A is properly installed on the equipment as described in the previous section. Step 2: Next, open the RSO-I AR to expose the cords and controls by disengaging the two latches on the front panel and lifting the lid. Step 3: Remove the cable from the cord storage area inside the RSO and connect the cable to the corresponding receptacle on the RSA-161A motor control box.
Page 6
CBS ArcSafe, Inc. 2616 Sirius Road Denton, TX 76208 Tel: 940-382-4411 Fax: 940-382-9435 Website: www.CBSArcSafe.com Email: info@CBSArcSafe.com DANGER! Ensure that personnel using this equipment are adequately trained in the operation of the switchgear they are planning to work with; that they are correctly stationed outside the arc flash boundary;...