Leightronix IncodeX Stream Product Quick Manual
H.264 hd/sd live streaming encoder
Hide thumbs
Also See for IncodeX Stream:
Related Manuals for Leightronix IncodeX Stream
Summary of Contents for Leightronix IncodeX Stream
- Page 1 PRODUCT QUICK GUIDE Hardware Setup | Network Configuration | VieBit Login and Advanced Interface Settings ™ END-TO-END Solutions for Broadcast & Streaming...
-
Page 2: Hardware Setup
If using analog audio, connect the analog audio source to audio inputs “R” and “L.” Using the included Ethernet cable, connect the IncodeX Stream Ethernet port directly to a cable or DSL modem, or to a 100/1000 switch on your network. Once powered on, check your network connection by looking at the Ethernet LEDs above the Ethernet port to confirm link status. - Page 3 The IncodeX Stream uses a default static IP address of 169.254.31.2 if a DHCP server is not detected on the network. Removing your DHCP enabled Windows PC from the network will cause the PC to default to a 169.254.x.x static IP address.
- Page 4 Logging Into VieBit ]to reveal the “Advanced Stream Your VieBit account host name can be found on the rear panel of your IncodeX Stream. Enter this host name into the Settings” popup window. The encoding settings are address bar of a web browser, then follow the steps below: used by your LEIGHTRONIX encoder to create the live stream.
- Page 5 © 2019 LEIGHTRONIX, INC. All rights reserved. The information in this manual is subject to change without notice. IncodeX Stream and VieBit are trademarks of LEIGHTRONIX, INC. LEIGHTRONIX, INC. 1125 N Cedar Rd | Mason, MI 48854 Phone: (800) 243-5589 or (517) 694-8000 | Fax: (517) 694-1600 www.leightronix.com...
Need help?
Do you have a question about the IncodeX Stream and is the answer not in the manual?
Questions and answers