4. Setting up ZC07 ............................5 4-1. Join the ZigBee Network ..........................5 4-2. Restore to Factory Setting..........................5 5. Home Automation Clusters for ZC07 ....................6 7. Netvox App Control Interface ....................... 8 8. Related Netvox Devices ........................10...
1. Introduction ZC07, a wireless dimmable LED bulb, is a robust light bulb based on ZigBee technology. ZC07 utilized E27 screw base and has 256 dimmable light levels. It is a long life LED bulb and has light weighted power consumption comparing to conventional light bulbs.
4. Setting up ZC07 4-1. Join the ZigBee Network Install ZC07 into the socket and power it on. After ZC07 is powered on, it will search for an existing ZigBee network and send a request to join the network automatically.
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table lists the clusters which are supported by ZC07. 1.End Point(s):0x01 2.Device ID:Dimmable Light (0x0101)
Page 8
Mandatory Identifier Name Type Range Access Default / Optional – 0x0004 ManufacturerName Character Read netvox string Bytes only 0 – 32bytes 0x0005 ModelIdentifier Character Read ZC07E3R string only 0 – 16 bytes 0x0006 DateCode Character Read string only 0x00 –0xff...
7. Netvox App Control Interface Add device to device list of ZC07 in Netvox App and the device information will show up in the management interface as below: The added device EP01 is a “Dimmable Light” device type. Choose it to enter control interface as below:...
Page 10
Blue area shows the identity duration in order to identify the specific device to control, if it is setted to be 60 seconds and the light flash 60 times to show identity. Red area shows the function of on / off / toggle. ...
8. Related Netvox Devices Z503: Local Commander Z501A: Remote Controller with ON/OFF and Level control 9. Important Maintenance Instructions • Please keep the device in a dry place. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits.
Page 12
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the ZC07 and is the answer not in the manual?
Questions and answers