Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EYC FUMD
Summary of Contents for EYC FUMD
- Page 1 Operation Manual eYc FUMD Clamp-on Ultrasonic Flow Transmitter eYc XXXXX eYc FUMD...
- Page 2 Product component-------------------------------------------------------------P.02 Installation and Connection---------------------------------------------------P.03 Panel Function--------------------------------------------------------------------P.03 Powering on-----------------------------------------------------------------------P.04 Keypad Functions----------------------------------------------------------------P.04 Window descriptions----------------------------------------------------------- P.04 Display Menu---------------------------------------------------------------- P.04 Setup Menu------------------------------------------------------------------ P.04 Setup Menu-Pipe parameter-------------------------------------------- P.05 Setup Menu-System setting--------------------------------------------- P.05 Setup Menu-Calibration-------------------------------------------------- P.05 Setup Menu-Output------------------------------------------------------- P.06 www.eyc-tech.com...
- Page 3 Flow Clamp-on Ultrasonic Flow Notice Thank you for choosing eYc FUMD Clamp-on Ultrasonic Flow Transmitter. This operation manual contains the important using and operation information of the flow transmitter. Please read carefully the reference manual before operation to make your flow transmitter exert the best performance.
- Page 4 Clamp-on Ultrasonic Flow Installation and Connection Once the flow transmitter is installed, it can be connected. You can be found the cable have 5 pin terminals, as per wiring diagram to connect 4 ... 20 mA output, RS-485. Panel Function www.eyc-tech.com...
- Page 5 Run-time / Daily Totalize / Month Totalize / Year Totalize. Press will return to previous menu. Display Run-time, Data, Month and Year net totalize. Setup Menu Press will display Setup menu. The following options are available ( by buttons) Pipe parameter System setting Calibration Output setting www.eyc-tech.com...
- Page 6 ; reset “ZERO Point” which was set by the user. Manual totalizer：The manual totalize is a separate totalize. Press to start, and press to stop it. It is used for flow measurement and calculation. Setup Menu-Calibration Press , Select 2. Calibration, and then display： www.eyc-tech.com...
- Page 7 OCT hardware or relay output signal. Enter the high alarm value; any of the measured flow, which is higher than the high value, will activate the alarm in the OCT hardware or relay output signal. www.eyc-tech.com...
- Page 8 Flow Clamp-on Ultrasonic Flow Sustainable | Green | Professional Temp. & Humid. / Dew Point / Air Velocity & Volume / Flow / Pressure Measuring Specialist Tel.: 886-2-8221-2958 , Web : www.eyc-tech.com e-mail : info@eyc-tech.com www.eyc-tech.com...
Need help?
Do you have a question about the FUMD and is the answer not in the manual?
Questions and answers