Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for S&T Kontron COMe Eval Carrier2 T6
- Page 1 USER GUIDE COMe Eval Carrier2 T6 (ADT6) Doc. Rev 1.2 Doc.-ID: 1065-4472...
- Page 2 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Page left intentionally blank www.kontron.com // 2...
-
Page 3: Disclaimer
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 COMe Eval Carrier2 T6 (ADT6) Disclaimer Kontron would like to point out that the information contained in this user guide may be subject to alteration, particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee on the part of Kontron with respect to technical processes described in the user guide or any product characteristics set out in the user guide. -
Page 4: Intended Use
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Intended Use THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE FOR THE OPERATION OF NUCLEAR FACILITIES, THE NAVIGATION, CONTROL OR COMMUNICATION SYSTEMS FOR AIRCRAFT OR OTHER TRANSPORTATION, AIR TRAFFIC CONTROL, LIFE SUPPORT OR LIFE SUSTAINING APPLICATIONS, WEAPONS SYSTEMS, OR ANY OTHER APPLICATION IN A HAZARDOUS ENVIRONMENT, OR REQUIRING FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF PRODUCTS COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS"). -
Page 5: Revision History
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Revision History Revision Brief Description of Changes Date of Issue Author Initial issue 2019-Sept-23 Introduction modified, corrected signals 2020-Jan-27 5V_MOD and V_WIDE_MOD variant 38116-0000-00-5 removed 2020-July-21 Terms and Conditions Kontron warrants products in accordance with defined regional warranty periods. For more information about warranty compliance and conformity, and the warranty period in your region, visit http://www.kontron.com/terms- and-conditions. -
Page 6: Symbols
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Symbols The following symbols may be used in this manual DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 7: For Your Safety
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 For Your Safety Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation. -
Page 8: Lithium Battery Precautions
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Lithium Battery Precautions If your product is equipped with a lithium battery, take the following precautions when replacing the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with same or equivalent battery type recommended by the manufacturer. ... -
Page 9: Weee Compliance
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 WEEE Compliance The Waste Electrical and Electronic Equipment (WEEE) Directive aims to: Reduce waste arising from electrical and electronic equipment (EEE) Make producers of EEE responsible for the environmental impact of their products, especially when the product become waste ... -
Page 10: Table Of Contents
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 TABLE OF CONTENTS Disclaimer ..........................................3 Intended Use ........................................4 Revision History ........................................5 Terms and Conditions ....................................... 5 Customer Support ......................................5 Customer Service ....................................... 5 Customer Comments ......................................5 Symbols .......................................... -
Page 11: List Of Tables
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.15. 24-pin ATX Power connector (J5) ..............................31 5.1.16. 8-pin ATX Power connector (J99) ..............................32 5.1.17. SPI BIOS (J45) ......................................33 5.1.18. LPC/eSPI (J29) ...................................... 34 Accessories ......................................35 Electrical Specification ..................................36 7.1. -
Page 12: List Of Figures
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Table 31: Jumper ......................................39 Table 32: Buttons ......................................41 Table 33: Pin-out List ..................................... 42 LIST OF FIGURES Figure 1: COMe Eval Carrier2 T6 ................................... 13 Figure 2: Block Diagram COMe-Type6 Eval Carrier ..........................17 Figure 3: Top View of COMe Eval Carrier2 T6 ............................ -
Page 13: 1/ Introduction
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 1/ Introduction 1.1. Product Description The COMe Eval Carrier2 T6 is being developed as an evaluation, testing and validation carrier board (baseboard) in ATX form factor for COM Express® Type 6 modules. It offers a testing platform for a huge variety of interfaces. Main purpose of this carrier board is to bring out all the signals from COM Express®... -
Page 14: Product Naming Clarification
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 1.2. Product Naming Clarification The product names for Kontron COM Express® Computer-on-Modules consist of a short form of the industry standard (COMe-), the form factor (b=basic, c=compact, m=mini), the capital letters for the CPU and Chipset Codenames (XX) and the pin-out type (#) followed by the CPU Name. -
Page 15: Com Express® Documentation
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 1.4. COM Express® Documentation The COM Express® Specification defines the COM Express® module form factor, pin-out, and signals. This document is available at the PICMG® website by filling out the order form. 1.5. -
Page 16: 2/ System Specifications
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 2/ System specifications 2.1. Component Main Data The table below summarizes the features of the motherboard. Table 2: Component Main Data COMe Eval Carrier2 T6 Form factor Testing Hardware with 244.0 mm x 305.0 mm (ATX) Memory EEPROM System JILI EEPROM... -
Page 17: Block Diagram
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 2.2. Block diagram Figure 2: Block Diagram COMe-Type6 Eval Carrier www.kontron.com // 17... -
Page 18: Product Variants
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 2.3. Product Variants Table 3: Product Variants Product Number Description 38116-0000-00-5 COMe height: 5mm 2.4. Environmental Conditions Table 4: Environmental Conditions Operating -40°C to +85°C Some connectors and Codecs has operating temperature only 0°C to +70°C, relative humidity (non-condensing) 10 % to 93 % at 40°C Storage -40°C to +85°C... -
Page 19: 3/ Mainboard Views
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 3/ Mainboard Views 3.1. Top View Figure 3: Top View of COMe Eval Carrier2 T6 4x PCI x1 (J85/J86/J87/J88) 12. HDA (J48) Power Connector (J99) 13. GPIO (J49) eDP (J14) 14. SPI (J45) ATX Power Connector (J5) 15. -
Page 20: Front Panel
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 3.2. Front panel Figure 4: Front Panel 23. 5x Audio Connectors (J78) 24. 2x DP (J32) 25. 1x DP (J39) 26. 2x USB (J63) 27. 4x USB 3.0 28. 1x GE Connector (J33) 29. -
Page 21: 4/ Mechanical Specification
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 4/ Mechanical Specification 4.1. Dimensions The dimensions of the carrier board are 244.0 mm x 305.0 mm. Figure 5: Board Dimensions www.kontron.com // 21... -
Page 22: 5/ Interfaces And Connectors
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5/ Interfaces and Connectors 5.1.1. 1000Base-T Connector (J33) Figure 6: 1000Base-T connector LED 1 LED 2 Table 5: 1000Base-T connector Ethernet 10 Signal Gigabit-Ethernet BaseT/100BaseT MDI0+ MDI0- MDI1+ MDI1- MDI2+ MDI2- MDI3+ MDI3- Table 6: Signals... -
Page 23: Usb Connectors (J64, J65, J33, J63)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.2. USB Connectors (J64, J65, J33, J63) For every USB 3.1 port, one USB2 and one USB31 lane has to be bonded. Therefore the number of available USB 2.0 ports decreases with every used 3.1 port. Available are: ... -
Page 24: Table 9: Graphic Interfaces Ddi
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Table 9: Graphic Interfaces DDI COMe Connector DDI1 COMe Connector DDI2 COMe Connector DDI3 DDI1_PAIR[0:3] DDI2_PAIR[0:3] DDI3_PAIR[0:3] DDI1_PAIR[4:6] DDI2_PAIR[4:6] DDI3_PAIR[4:6] DDI1_CTRLCLK_AUX+ DDI2_CTRLCLK_AUX+ DDI3_CTRLCLK_AUX+ DDI1_CTRLDATA_AUX- DDI2_CTRLDATA_AUX- DDI3_CTRLDATA_AUX- DDI1_DDC_AUX_SEL DDI2_DDC_AUX_SEL DDI3_DDC_AUX_SEL DDI1_HPD DDI2_HPD DDI3_HPD Table 10: Graphic Interfaces LVDS and eDP COMe Connector LVDS... -
Page 25: Hd Audio (J78)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.4. HD Audio (J78) HDA Audio Codec is U6 ALC886. Figure 8: HD Audio Table 12: Colorsceme HD Audio Color Connector Light Blue Analog line level audio input Lime Analog line level audio output for the main stereo signal (front speakers or headphones) Pink Analog microphone audio input... -
Page 26: Hd Audio Internal (J48)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.5. HD Audio Internal (J48) HDA Audio Codec is U6 ALC886. Figure 9: HD Audio 10-pin Table 14: HD Audio internal Connector HDA_BITCLK HDA_SDIN1 HDA_SDIN0 HDA_SDIN2 HDA_SYNC HDA_SDOUT HDA_RST# 5.1.6. COM Ports Table 15: COM Ports COMe Signal EC/kCPLD function... -
Page 27: I2C And Smbus (J57 And Fpga U17)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.7. I2C and SMBus (J57 and FPGA U17) I2C is connected to EEPROM U32 (24C32), Feature Connector J57 and FPGA U17. VGA I2C connected to VGA connector and can be measured on MTP72 and MTP12. LVDS_I2C is connected to LVDS connector J2 and eDP connector J14 Table 16: SMBus COMe (3.3V, Feature Connector... -
Page 28: Gpio (General Purpose Input And Output( (J49)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.9. GPIO (General Purpose Input and Output( (J49) Figure 10: GPIO Table 18: GPIO with 10 pins Signal Signal V_3V3_S0_GPIO GPIO_GPO0 GPIO_GPI0 GPIO_GPO1 GPIO_GPI1 GPIO_GPO2 GPIO_GPI2 GPIO_GPO3 GPIO_GPI3 Figure 11: Configuring GPIO Pins using JIDA32/K-Station The GPI and GPO pins can be configured using JIDA32/K-Station. -
Page 29: Feature Connector (J57)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 COMe Port PCIe connector SATA1 SATA2 SATA3 SATA_ACT# LED D42 indicates SATA activity. 5.1.11. Feature Connector (J57) Figure 12: Feature Connector with 24 pins Table 20: Feature Connector with 24 pins Signal Signal V_5V0_S0... -
Page 30: Fan 3-Pin/4-Pin Jumper (J93)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Signal Signal LED_PWROK_J PWR_OK_CPLD_OUT SATA_ACT_R_J# SATA_ACT# CPLD_DEBUG_L11 CPLD_DEBUG_N12 RAPID_SHUTDOWN_5V0_EXT V_5V0_S5 V_3V3_S5 V_1V8_S5 V_12V0_S0 V_5V5_S0 V_3V3_S0 V_1V5_S0 5.1.13. Fan 3-Pin/4-Pin Jumper (J93) Figure 14: Fan 3-Pin/4-Pin Jumper with 3 pins J93 Jumpered to 2/3: Regulated 3 Pole Fan, J93 Jumpered to 1/2: 4 Pole Fan with 12 V The analog output voltage on this connector is generated via a discrete linear voltage regulator from the PWM signal of the HWM. -
Page 31: Fan Connector (J47)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.14. Fan Connector (J47) Figure 15: Fan Connector with 4 pins Table 22: Fan Connector with 4 pins (J47) Description V_Fan Power (12V/5V switchable) FAN_TACH_CON (sense) FAN_PWM_CON (drive) 5.1.15. 24-pin ATX Power connector (J5) Figure 16: ATX Power connector with 24 pins Table 23: : ATX Power connector with 24 pins Signal... -
Page 32: 8-Pin Atx Power Connector (J99)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Signal Cable Colour 3,3 V Orange 3,3 V/ Orange/ 3.3 V sense Brown −12 V Blue Black Power ON Green Black Black Black Reserved None Black If any of the supply voltages drops below the allowed operating level longer than the specified hold-up time, all the supply voltages should be shut down and left OFF for a time long enough to allow the internal board voltages to discharge sufficiently. -
Page 33: Spi Bios (J45)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Signal Jumpers "V_WIDE_MOD": If these two Jumpers are closed, the Wide Range input Voltage (J99) is provided to the Com Express Module. If these Jumpers are removed, the Module won’t start. Each Jumper can handle up to 8 A, because there are two Jumpers in Parallel a input current up to 16 A can be delivered. -
Page 34: Lpc/Espi (J29)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 5.1.18. LPC/eSPI (J29) Close J66 for 1V8 eSPI mode, 0pen J66 for 3V3 LPC mode. Figure 18: LPC/eSPI (J29) Table 27: LPC/eSPI (J29) COMe Connector LPC_AD[0:3] 14, 13, 11, 12 LPC_FRAME# LPC_DRQ[0:1]# 2, 4 LPC_SERIRQ... -
Page 35: 6/ Accessories
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 6/ Accessories Table 28: General Accessories List Product Number Mounting Description 38017-0000-00-5 COMe Mount KIT 5mm 1set Mounting Kit for 1 module including screws for 5mm connectors 38017-0000-00-0 COMe Mount KIT 8mm 1set Mounting Kit for 1 module including screws for 8mm connectors Product Number... -
Page 36: 7/ Electrical Specification
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 7/ Electrical Specification 7.1. Supply Voltage one ATX Main Power 24pin Power supply for the module: the ATX_12V P4 connector provides a wide range of input, depending on module specification 7.2. -
Page 37: 8/ Features
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 8/ Features 8.1. Rapid Shutdown (J21, Pin17) Kontron has implemented a rapid shutdown function. It works as follows: An active-high shutdown signal to S3 is asserted by the COMe Eval Carrier2 T6 (ADT6) carrier through button switch SW5. -
Page 38: Leds And Indicators
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 8.3. LEDs and indicators Indicators and LEDs indicate only presence of voltage on certain signal, but not necessarily a correct shape and level of the voltage. This is important especially for power supplies – power good signal would provide more accurate indication, but it is not possible to provide this for all signals (for example ATX power signals share one power good). -
Page 39: Jumper
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 8.4. Jumper Table 31: Jumper Connector Open J3-J4 Connect 5V_S5 to module Disconnect 5V_S5 from module (default) J6-J7 Connect 12V_S0 to module Disconnect 12V_S0 from module (default) J100-J101 Connect 12V_S0 to module Disconnect 12V_S0 from module (default) AT Mode (Always on) -
Page 40: Figure 19: Jumpers 5V_Mod And V_Wide_Mod
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Figure 19: Jumpers 5V_MOD and V_WIDE_MOD Jumper "5V_MOD": If this Jumper is closed, the V_5V0_S5 voltage is provided to the Com Express Module. If the Module should run at Single Supply Mode, this Jumper has to be removed. -
Page 41: Button Switches
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 8.5. Button Switches Figure 20: Button Switches Table 32: Buttons Button Switch Function Powerbutton Sys_Reset Rapid Shutdown (optional) Sleep THRM# www.kontron.com // 41... -
Page 42: 9/ Come Connector Pin-Out (J61)
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 9/ COMe Connector Pin-out (J61) Figure 21: COMe Connector with 220 pins This table lists the pins and signals according to the PICMG specification COM.0 Rev 3.0 Type 6 standard. Figure 22: COMe Connector Pinout To protect external power lines of peripheral devices, make sure that: the wires have the right diameter to withstand the maximum available current the enclosure of the peripheral device fulfills the fire-protection requirements of IEC/EN60950. - Page 43 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Row A Row B Row C Row D GBE0_LINK# LPC_DRQ0#/ESPI_A LERT0# GBE0_MDI1- LPC_DRQ1#/ESPI_A USB_SSRX2- USB_SSTX2- LERT1# GBE0_MDI1+ LPC_CLK/ESPI_CK USB_SSRX2+ USB_SSTX2+ GND(FIXED) GND(FIXED) GND(FIXED) GND(FIXED) GBE0_MDI0- PWRBTN# USB_SSRX3- USB_SSTX3- GBE0_MDI0+ SMB_CK USB_SSRX3+ USB_SSTX3+ GBE0_CTREF SMB_DAT...
- Page 44 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Row A Row B Row C Row D HDA_SDOUT I2C_CK DDI2_CTRLDATA_A DDI1_PAIR2- BIOS_DIS0#/ESPI_S I2C_DAT DDI2_DDC_AUX_SE DDI1_DDC_AUX_S THRMTRIP# THRM# RSVD USB6- USB7- DDI3_CTRLCLK_AUX DDI1_PAIR3+ USB6+ USB7+ DDI3_CTRLDATA_A DDI1_PAIR3- USB_6_7_OC# USB_4_5_OC# DDI3_DDC_AUX_SEL RSVD USB4- USB5- DDI3_PAIR0+...
- Page 45 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Row A Row B Row C Row D PCIE_TX3- PCIE_RX3- PEG_RX2- PEG_TX2- GND(FIXED) GND(FIXED) GND(FIXED) GND(FIXED) PCIE_TX2+ PCIE_RX2+ PEG_RX3+ PEG_TX3+ PCIE_TX2- PCIE_RX2- PEG_RX3- PEG_TX3- GPI1 GPO3 RSVD PCIE_TX1+ PCIE_RX1+ RSVD PCIE_TX1- PCIE_RX1- PEG_RX4+ PEG_TX4+...
- Page 46 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Row A Row B Row C Row D PCIE_CLK_REF+ BIOS_DIS1# PEG_RX11+ PEG_TX11+ PCIE_CLK_REF- VGA_RED PEG_RX11- PEG_TX11- GND(FIXED) GND(FIXED) GND(FIXED) GND(FIXED) SPI_POWER VGA_GRN PEG_RX12+ PEG_TX12+ SPI_MISO VGA_BLU PEG_RX12- PEG_TX12- GPO0 VGA_HSYNC SPI_CLK VGA_VSYNC PEG_RX13+ PEG_TX13+...
-
Page 47: 10/ Technical Support
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 Technical Support For technical support contact our Support department: E-mail: support@kontron.com Phone: +49-821-4086-888 Make sure you have the following information available when you call: Product ID Number (PN), Serial Number (SN) The serial number can be found on the Type Label, located on the product’s rear side. - Page 48 COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 The goods for repair must be packed properly for shipping, considering shock and ESD protection. Goods returned to Kontron Europe GmbH in non-proper packaging will be considered as customer caused faults and cannot be accepted as warranty repairs. Include the RMA-Number with the shipping paperwork and send the product to the delivery address provided in the RMA form or received from Kontron RMA Support.
-
Page 49: List Of Acronyms
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 List of Acronyms ACPI Advanced Configuration & Power Interface Base Management Controller COMe COM Express® - Computer on Module Express ElectroMagnetic Compatibility JIDA JUMPtec Intelligent Device Architecture. Standard. JIDA is essentially an EEPROM, a data structure for the EEPROM, and a software definition. -
Page 50: About Kontron
COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2 About Kontron Kontron is a global leader in Embedded Computing Technology (ECT). As a part of technology group S&T, Kontron offers a combined portfolio of secure hardware, middleware and services for Internet of Things (IoT) and Industry 4.0 applications.
Need help?
Do you have a question about the Kontron COMe Eval Carrier2 T6 and is the answer not in the manual?
Questions and answers