Zanussi 131456 Specifications

RANGE
COMPOSITION
The range consists of 3 sinks, with
all-round apron panelling, 2100,
2400 mm in length, and with two
bowls.
HD PLUS DOUBLE BOWL SINKS ON LEGS
FUNCTIONAL AND
CONSTRUCTION
FEATURES
Worktop in 12/10, 304 AISI
�
stainless steel, 50 mm in thickness
and with overflow rim along the top;
the worktop has welded corners and
anti-drip edges.
Sink bowl in 304 AISI stainless
�
steel.
The bowls are seam welded and
�
polished, the base is inclined
towards the drain outlets. All bowls
are supplied as standard with an
overflow pipe and a drain hole; the
bowl is seam welded and polished,
the base is inclined towards the
drain outlets.
Rear splashback with 10 mm
�
rounded corner, 100 mm in height
and 13 mm deep.
Round section legs and 50 mm
�
Dia. height-adjustable (-60 +10 mm)
feet in 304 AISI stainless steel to
guarantee perfect alignment with
other food preparation equipment.
For an easy installation (in case of
external pipes or other connections)
legs are mounted at 80 mm from the
edge of table top.
Quick and easy installation as the
�
Taps are easily installed from the
rear.
A 50 mm thick lower shelf, in 304
�
AISI stainless steel, can be easily
slotted into position, 200 mm from
the floor.
All models comply with the more
�
strict international standards as far
as hygiene and cleanability are
TECHNICAL DATA
CHARACTERISTICS
External dimensions - mm
width
depth
height
Worktop thickness - mm
Upstand dimensions - mm
height
depth
radius
Bowls - n.
Bowl dimensions (wxdxh) - mm
Net weight - kg.
Drainer position
2100/2400 mm
ZANUSSI
P R O F E S S I O N A L
concerned.
MODELS
LG2126DXE LG2126SXE
133572 133573
2100 2100
700 700
900 900
50 50
100 100
13 13
R=10 R=10
2 2
600x500xH300 600x500xH300
65 65
Right Left
LG2426E
133574
2400
700
900
50
100
13
R=10
2
600x500xH300
70
Right and Left