Advertisement
Quick Links
> ICE-Balancer <
User instruction
This safety instruction / declaration of the manufacturer has to
be kept on file for the whole lifetime of the product.
Translation of the original user instruction
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
EG-Einbauerklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II B und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete unvollständige Maschine den
grundlegenden Anforderungen der Maschinenrichtlinie 2006/42/EG (Anhang 1) entspricht.
Die nachfolgend bezeichnete unvollständige Maschine darf, in der gelieferten Ausführung
erst dann in Betrieb genommen werden, wenn festgestellt wurde, dass die Maschine, in
die diese unvollständige Maschine eingebaut werden soll, den Anforderungen der EG-
Maschinenrichtlinie 2006/42/EG entspricht.
_____________________________________________
Produktbezeichnung:
ICE-Wippe
_____________________________________________
IW
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Die speziellen Unterlagen zur unvollständigen Maschine nach Anhang Vll Teil B
wurden erstellt und werden auf begründetes Verlangen in geeigneter Form übermittelt.
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, Funktion und Unterschrift Verantwortlicher
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
ICE-Balancer
Simple test, management and
documentation subject to mandatory testing
operating resources, equipment and components.
EC-Mounting declaration
According to the EC-Machinery Directive 2006/42/EC, annex II B and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the following incomplete machines correspond to the basic re-
quirements of the Machinery Directive 2006/42/EC (annex 1). The following incomplete
machine, in the delivered machine, may only be put into operation when the machine
in which the incomplete machine shall be assembled, has been tested according to the
requirements of the EC-Machinery Directive 2006/42/EC.
Product name:
_____________________________________________
ICE-Balancer
_____________________________________________
IW
The following harmonized norms were applied:
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
The special documents about the incomplete machine according to annex VII part B
have been created and can be handed over in a suitable form on request.
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
EN
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
ICE-Balancer
1
Advertisement
Related Manuals for RUD ICE-Balancer
Summary of Contents for RUD ICE-Balancer
- Page 1 Die speziellen Unterlagen zur unvollständigen Maschine nach Anhang Vll Teil B wurden erstellt und werden auf begründetes Verlangen in geeigneter Form übermittelt. Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ Dr.-Ing.
-
Page 2: Safety Instructions
-60°C up to 200°C no reduction 200°C up to 250°C minus 10 % • The ICE-Balancer must not be used under load with 250°C up to 300°C minus 40 % an limit inclination angle of 10° (see picture 11). Temperatures exceeding 300°C are prohibited! •... - Page 3 IVS ICE-Connecting Links. Sequence of assembly: Pic. 6: Assembly of the second bow part In the following description the assembly of the con- necting link will be described exemplarily with the example of a ICE-Balancer and an ICE chain. ICE-Balancer...
- Page 4 • Leave hazardous area when possible. • Monitor always attached or lashed loads. • Read for all lifting means the RUD sling chain safety instructions for RUD lifting means. Pic. 8: Assembly of connecting pin 6. Secure the assembled connecting link as follows (Pic.
- Page 5 HINT The maximum allowed balancer skewing of 10° can be recognised by the specific shape of the ICE-Balancer. The limit skew- ing angle of 10° can be easily recognized. Pic. 13: Max. inclination angle β = 45° • A skewing of the balancer under load by more than 10°...
- Page 6 • Deformations at the component. knowledge and required skills. • Check readability of nominal size and manufacturer sign • Only RUD original spare parts must be used and • Mechanical damage like notches especially at all repairing and overhauling operations must be areas with tensile stress.
- Page 7 This is not valid if it is guaranteed that the load will be distributed equally to 2 additional legs [...]. By using the ICE-balancer, the load distribution of a 2 x 2-leg sling will be forwarded to all 4 chain legs.
Need help?
Do you have a question about the ICE-Balancer and is the answer not in the manual?
Questions and answers