Summary of Contents for Artidor AR-030
- Page 1 User Manual Explosion-safe Door Magnet Type AR-030 II 3 G Ex ec IIC T6 Gc II 3 D Ex tc IIIC T80ºC Dc...
- Page 2 Safety Instructions The AR-030 Door Magnet is an explosion-safe product suitable for use in hazardous areas with explosion hazard from flammable gasses, vapors and mist, classified as zone 2 of zone 22. This manual must be read and understood for safe use of the Door Magnet. All warnings and instructions must be followed.
- Page 3 Application The explosion-safe AR-030 door magnet has been designed for and are suitable for use in hazardous classified areas due to flammable gases, vapors, mist, fibers and dust. Because they are explosion-safe and certified on the basis of...
- Page 4 770 grams Marking and warning on the equipment The marking label as shown below will be attached to the AR-030 Door Magnet. AR-030 DOOR MAGNET II 3 G Ex ec IIC T6 Gc, II 3 D Ex tc IIIC T80°C Dc Year: 2020 Cert.
- Page 5 Maintenance For the maintenance of the AR-030 door magnet the requirements as stated in EN 60079-17 apply. If the door magnet or the connection cable is damaged or no longer in good condition it must be repaired immediately. The power supply to the door magnet must be switched off and may only be restored after the maintenance has been carried out and approved.
- Page 6 This document can be subject to change without notice. User Manual explosion-safe AR-030 door magnet 6 / 6 Issue April 2020...
Need help?
Do you have a question about the AR-030 and is the answer not in the manual?
Questions and answers