Dynamic Select Switch - Mercedes-Benz AMG GLC Coupe Supplement Manual

12
Driving and parking
Information on the AMG ceramic high-per‐
formance composite brake system
% The AMG ceramic high-performance compo‐
site brake system is only available on the
Mercedes-AMG GLC 63 S 4MATIC+ model.
The brake system is designed for heavy loads.
This may lead to noise when braking. This effect
can also occur after washing the vehicle.
The noise depends on the following factors:
speed
R
brake force
R
environmental conditions, e.g. temperature
R
and air humidity
% Have the brake system checked at a quali‐
fied specialist workshop after it has been
subjected to extreme loads.

DYNAMIC SELECT switch

Function of the DYNAMIC SELECT switch
% This chapter describes the function of the
DYNAMIC SELECT switch for the
Mercedes‑AMG GLC 43 4MATIC .
Use the DYNAMIC SELECT switch to change
between the following drive programs:
o (Slippery): optimized pulling away and
driving characteristics in wintry and slip‐
pery road conditions
= (Individual): individual settings
A (Comfort): comfortable and economical
driving style
C (Sport): sporty driving style
B (Sport +): particularly sporty driving style
Mercedes-AMG recommends selecting the drive
program A when in city traffic or stop-and-go
traffic.
Depending on the drive program selected, the
following vehicle characteristics will change:
Drive:
R
Engine and transmission management
-
Active Distance Assist DISTRONIC
-
ESP ®
R
Availability of the ECO start/stop function
R
Suspension
R
Position of the exhaust gas flaps
R
Steering
R
Availability of glide mode
R
%
You can also change the following vehicle
characteristics using the buttons in the cen‐
ter console:
Position of the exhaust gas flaps
R
Suspension
R
Function of the DYNAMIC SELECT switch
% This chapter describes the function of the
DYNAMIC SELECT switch for the
Mercedes‑AMG GLC 63 4MATIC+ and
GLC 63 S 4MATIC+.