Redback A 4488 Operating Manual

Redback A 4488 Operating Manual

Paging console, audio switcher, 16 zone switcher
Hide thumbs Also See for A 4488:

Advertisement

Quick Links

A 4488
1.0
Overview
The A 4488 paging microphone is a simple to use and elegant desk top design which provides up to 4 zones of paging. It
allows the operator to manually select any zone or any combination of zones. Also included is an All Call & Cancel button.
A pre-announcement chime is available at the paging console and through the PA system. Both of these are set by DIP
switches on the rear of the unit. Provision has also been made on the rear of the unit for a 3.5mm BGM input for
background music. The paging microphones can be used in conjunction with the A 4489A Audio Switcher or the A 4580
16 Zone Paging System.
A maximum of two paging consoles can be connected to the A 4489A Audio Switcher at the same time. These work in a
"first in, best dressed" arrangement. Each unit must be assigned an ID number through DIP switch settings on the rear of
the unit. A maximum of six paging consoles can be connected to the A 4580.
The A 4489A Audio Switcher provides a Microphone level or Line level output which can be connected directly to the
inputs of up to four amplifiers to provide up to four zones of audio. Connection between the A 4488 and A 4489A is via
a Cat5e cable which carries power and the balanced audio output from the microphone. A BGM input on the rear of the
A4489A directs background music to all zones until over-ridden by zone paging.
2.0
Features
• Four zones of paging.
• 3.5mm BGM input on rear of microphone
• Pre-announcement chime.
• Mic volume adjustment
• BGM input for background music to all zones
www.altronics.com.au
Redback® A 4488 Paging Console
• High level balanced output via Cat 5 cable
• 24V DC power supplied via Cat 5 cable *
• Chime volume adjustment
• BGM (paging microphone) volume adjustment
Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
Operating Manual
A 4488
Paging Console
A 4489A
Audio Switcher
A 4580
16 Zone Switcher
Distributed by Altronic Distributors Pty. Ltd.
Redback® Proudly Made In Australia
User manual revision number: 1.6 13/07/2020
Redback® Proudly Made In Australia
A 4489A
A 4580
1

Advertisement

Table of Contents
loading

Summary of Contents for Redback A 4488

  • Page 1 Overview The A 4488 paging microphone is a simple to use and elegant desk top design which provides up to 4 zones of paging. It allows the operator to manually select any zone or any combination of zones. Also included is an All Call & Cancel button.
  • Page 2: Important Note

    On On On O NOTE: The ID must be set to either ID1 or ID2 when using the A 4488 with the A 4489A. On O When using the A 4488 with the A 4580 the ID’s must be set between 3-8. (Therefore a On On O maximum of six A 4488 paging consoles can be connected to the A 4580.
  • Page 3: Connection Configurations

    Use this method if using amplifiers with low level balanced inputs. If the amplifiers used have line level inputs use the configuration outlined in option 2. Typical connection of the A 4488/s and A 4489A with individual ampli ers for each zone using mic levels www.altronics.com.au...
  • Page 4 Note: The background music will be present on all zones and is overidden by zone paging (see section 8.0 for more de- tails). Typical connection of the A 4488/s and A 4489A with individual ampli ers for each zone using Line levels www.altronics.com.au...
  • Page 5 When using this method the background music is output to all zones until over-ridden by zone paging. 8.1 BACKGROUND MUSIC (REAR OF A 4488 PAGING CONSOLE) The second method involves connecting an audio source (such as a mobile phone, tablet etc.) to the 3.5mm input jack on the rear of the paging microphone as shown in Figure 7.
  • Page 6 Redback® A 4488 Paging Console Next move the PTT switch to the up position which is lablelled “BGM”. While the switch is in this position and only this position will the background music will be piped out to the zones selected.
  • Page 7 Redback® A 4488 Paging Console If BGM is active on paging console 1 and paging is to be initiated by this same console then the PTT switch will need to be moved to the “Page” position. Once the PTT switch is moved off the “BGM” position, then the BGM stops.
  • Page 8: 11.0 Trouble Shooting

    A maximum of six consoles can be connected at one time but only used in certain configurations. There are four RJ45 ports on the back of the A 4580 which can be used to connect the A 4488 paging consoles. Each port can accomodate a maximum of 1 paging console without the aid of external power supplies.

This manual is also suitable for:

A 4489aA 4580

Table of Contents