Advertisement
Quick Links
Advertisement
Summary of Contents for Rabe Sturmvogel L Series
- Page 1 Order No. 9900.00.20GB01 Operating Instructions Seedbed combination Sturmvogel L...
- Page 3 The term ”unauthorized operation” also covers the full observance of all operating, maintenance and servicing specifications: including, for example, the kW/PS limits and the exclusive use of original spare parts. The use of non-original accessories, spares and/or consumables that do not carry specific approval from RABE Agrarsysteme GmbH+Co.KG shall void all warranty liabilities.
-
Page 4: Technical Data
Technical data Sturmvogel L dimensions in mm weight (approx.) harrow tractor in kg. Type leafs max KW/PS (approx.) 4500 L 1706 100/135 4500 1698 6000 L 1950 133/180 6000 2312 2950 3168 7500 L 2865 147/200 7500 3280 9000 L* 3385 178/240 9000... - Page 5 (”3” among others = code no., 6 (r, l) explained in same key to pictograms; r = right; l = left side of implement). Replace any missing or damaged warning labels! (These can be purchased from RABE under the rele- vant order no.).
- Page 6 Safety precautions DO NOT allow anyone to stand between the tractor and the implement during coupling or uncoupling. Note that this includes stepping between the tractor and implement to operate the external hydraulic controls (risk of injury). Set the tractor’s control hydraulics to ”position control”...
- Page 7 Set-up Check both parts of the coupling for compatibility (cat.: tractor/ implement). Set the lower links of the tractor to the same height. Couple the lower link shaft. Set the upper control arm to a height that allows it to reach the implement when in operation. Correctly secure the coupling assembly (three-point linkage).
- Page 8 Operation Avoid taking sharp curves during operation and always raise the implement before reversing. The lower links of the tractor should be positioned to one side; limit any lateral movement on steep slopes. Bring the implement frame into horizontal position by adjusting the length of the top link.
- Page 9 Maintenance Before working on the attached implement, switch off the engine and remove the ignition key. DO NOT work under a raised implement. If the implement needs to be raised, take adequate precautions to prevent the implement from dropping by accident. Before working on the hydraulic system, completely lower the implement in its folded out position and release any hydraulic pressure.
- Page 10 40 cm, or overhangs by more than 1 metre with respect to the existing rear lights. A lighting system – with warning labels – can also be obtained from RABE as an optional extra.
- Page 11 Sturmvogel 6000 L...
- Page 12 Positioning of warning labels on the unit For explanation see subsequent warning symbols...