Table of Contents
Advertisement
User-Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Disconnect the Air Tank and safely discharge any residual air pressure in the air tank
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM AIR TANK FAILURE:
Do not use damaged equipment. If abnormal noise, vibration,
or leaking air occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
Note: These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the air tank.
1. BEFORE EACH USE, inspect the general
condition of the air tank. Check for:
• loose hardware or housing,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. Regularly drain water condensation from Tank,
to prevent internal corrosion and damage to the tank.
To drain, hold Tank upside down and
remove the Bypass Valve Spring (2).
Storage
1. Turn the round On/Off Wheel (5) clockwise
to the Off position. This will keep air
from leaking out of Air Hose.
Item 65594 65595
For technical questions, please call 1-888-866-5797.
3. Due to internal corrosion, do not use the tank beyond
the destroy date stamped into the leg of the Tank (1).
Safely disable the tank as follows:
a. Depressurize air tank completely,
by holding the Bypass Valve Spring open.
WARNING! Failure to properly depressurize the tank
before proceeding may result in serious personal injury.
b. Remove the pressure gauge and hose.
c. Deliver the tank to a pressure tank
disposal service, if available.
d. If a pressure tank disposal service is not
available, place the tank in a secure, stable
working location and drill at least two 1/2"
(or larger) holes through the side of the tank.
Then, deliver to appropriate recycling center.
2. Store in a dry, dust-free location away from
children and any flammable materials.
3. To remove all air from the Air Tank, pull the Ring (13)
until the Gauge indicates zero and the air flow stops.
Page 5
Advertisement
Table of Contents
