Summary of Contents for Openplan Systems SLIDING DOOR
- Page 1 Door SLIDING DOOR ASSEMBLY d 67”H for 36” wide opening 53H AND 67H FOR 36W OPENING bly support, refer to www.openplan.com www.openplan.com | sales@openplan.com | 844.OPS.OPS1 | REV 07.01.2020 OPS1...
- Page 2 Parts List Parts List Image Part Image PART DESCRIPTION Part tion Image Image Description Image Description Part Tools Required Image Sliding Door Frame and glass Description Part r Frame Image Sliding Door Frame ing Door Frame glass Description Frame and Plexiglass nd Plexiglass lass Sliding Door Frame and Plexiglass Sliding Door Frame 36”...
- Page 3 ASSEMBLY GUIDE Slide the Track onto the TRB Rail. Attach the Step 2: Set the TRB Clips and Track onto the highest Step 1 Step 2 into the TRB rail to mount the track to the A02 slot position on the A02 Panel. Make sure the teeth tep 1: Assemble the Door Track.
- Page 4 There should be a smooth roll and minimal obstruction when rolling the door in or out. Check positioning, alignment, and level of the Sliding Door, ensuring the frame is not resting on the Guide Bracket . Adjust the panel height to lower out the caster stem.