Advertisement
Assembly
1. Open the safety valves and inflate the parts one by one. Be sure to close the valves after inflation. Air
pump is not included.
NOTE: Do not over inflate. Do not use either an air compressor or compressed air.
NOTE: For inflatable floor, the air valve is on the bottom side of the product.
2. Tie the slide to the pool with the provided ropes to the relevant grommets.
3. Connect your garden hose to the Hose Adapter.
4. Slowly fill the pool to a proper water lever, reach but do not exceed the fill line on the pool's interior.
DO NOT OVERFILL as this could cause the pool to collapse.
ATTENTION: Do not leave pool unattended while filling with water.
NOTE: All drawings for illustration purpose only. May not reflect actual product. Not to scale.
Empty The Pool
1. Check local regulations for specific directions regarding disposal of swimming pool water.
2. Deflate all the air chambers, at the same time push down the wall of the pool to release the
water. Make sure release all the water in 20 minutes.
NOTE: Drain by adult only!
303021204782_53091_14.8x21cm_海洋游乐水池说明书_19N-OEM-775
Advertisement
