Advertisement
Quick Links
Advertisement
Summary of Contents for Tekview Alert Pal
- Page 1 Alert Pal Alert Pal Quick Start Guide...
- Page 3 Alert Pal Get To Know Your Alert Pal Get an SMS / MMS message when Infrared LEDs enable the camera to motion detection / PIR is activated capture images in the dark !@*& !@*& Instant alert by SMS (text), MMS...
- Page 4 Alert Pal Get To Know Your Alert Pal STEP 1. Prepare Your Alert Pal 1. Slide the battery compartment cover downwards 2. Lift the battery cover away from the device • WARNING: Always be sure to switch off the camera and disconnect the power before inserting or removing the SIM card.
- Page 5 For optimum performance do not cover your Alert PalTM, position it with good access to the mobile signal. You should not rely on any voice call / SMS / MMS capability that your Alert Pal provides for emergency or essential communication.
- Page 6 2. Plug the power adaptor into a wall outlet or socket strip 3. Slide the power switch to the UP position to turn on your Alert Pal 4. After approximately 60 seconds, the camera bleeps to indicate that the GSM network has been found 5.
- Page 7 By default the build-in infrared body sensor is enabled and camera movement detection is enabled. When the alarm is raised your Alert Pal sends an SMS to the master followed by an MMS with images. Other options include voice call and email alarms.
- Page 8 (This can only be performed by the Master user) 1. Send your Alert Pal an SMS with text #06#AdditionalUserNumber# 2. To add several emergency numbers to your Alert Pal send an SMS with text #06#AdditionalUserNumber#AdditionalUserNumber# 3. The Master user will receive an SMS reply that the additional user has been...
-
Page 9: Remote Control
Pairing your Alert Pal with the panic buttons , two are supplied. Before use, each panic button must be paired with your Alert Pal 1. Send your Alert Pal an SMS with text #196#SOS1# 2. You will then get an SMS back to say it has accepted your command 3. - Page 10 Request an MMS Image from your Alert Pal (This can be performed by the Master user / Additional User / Guest) Master User / Additional User...
- Page 11 Deleting Users from your Alert Pal (This can only be performed by the Master user) 1. To delete an additional user send your Alert Pal an SMS with text #113#AdditionalUserNumber# 2. You will then receive an SMS that the number has been successfully deleted...
- Page 12 Alert Pal Note 1. Master and additional users SMS command format: #code#content# 2. Guest users SMS command format: #code#password#content# 3. The password must be a 4 digit number 4. The original password is 1234 5. Your Alert PalTM will reply to the user after it receives the SMS command 6.
- Page 13 SMS commands and voice calls. There are three levels of access – MASTER, ADDITIONAL USER and GUEST. MASTER There is one master who has complete control over Alert Pal , Master only commands; SMS to send What it does...
- Page 14 Alert Pal Master & Additional User Up to 10 users set by the master can access Alert Pal , Master and Users Commands; Master & Users can also call Alert Pal and listen in via the built in microphone. SMS to send...
- Page 15 Visit www.tekview.co.uk to download the full user guide for your Alert Pal How to factory reset your Alert Pal If the master phone is lost or you want to set up your Alert Pal again from the beginning, you can use factory reset to set all settings and parameters back to the factory default.
- Page 16 If the problem can’t be resolved just send the camera back to Tekview Ltd at our head office and we will fix the fault or send you a replacement camera out free of charge.
-
Page 17: General Troubleshooting
SIM card is inserted correctly Alert Pal will not respond Possible Alert Pal fault Switch off the power to the to any commands (indicator camera, check the SIM card not working) - Page 18 2 hours period of time then restart the camera If the problem can’t be solved with the above help please contact Tekview Ltd for assistance. www.tekview.co.uk...
- Page 20 Tekview Limited Tekview House | 24 Tournament Way | Ashby de la Zouch | Leicestershire | LE65 2UU Tel: 01530 412890 | Fax: 01530 415995 Email: sales@tekview.co.uk | Web: www.tekview.co.uk...
Need help?
Do you have a question about the Alert Pal and is the answer not in the manual?
Questions and answers