Related Manuals for YELLOWRIVER YR-COB200Z
Summary of Contents for YELLOWRIVER YR-COB200Z
- Page 2 Please note that the damage caused by violation of operating procedures does not belong to the scope of warranty. 200W COB Moving Head Spot Technical specification LED PARAMETER Model：YR-COB200Z LED：LED 200W WHITE LED life span：20000H CCT：5600K Controls parameters Strobe:：1-20t/s...
- Page 3 fault prosecution, manual control channel , data memory, the software version information, restore factory Settings, the scanning and the effect correction result. LED opening mode: supports instant blackout and light on Effect parameters: Color wheel: 4 colors (R,G,B,Y) + white, semi-color effect +bi-direction flow effect. Beam Angle: zoom, 14-60 degrees.
- Page 4 Working parameters: Operating voltage: AC100V~240V, 50/60hz...
-
Page 5: Manual Control
Power: 250W Option Description Safety parameters: 1CH. X 0~255 The yellow arrow indicates the selection. Press the “OK” button to enter the editing state. At this time, the font color Safety protection: automatically cut off the power when the body overheats or the system ……... - Page 6 2. Keep the distance between the light outlet direction and the subject at least more than 3 meters. "OK" button again to save and exit the editing state. Channel Standard 10CH Standard 10CH mode 3.The direction of the light is an optical lens. No external force can hit the glass in the process of Mode operation.
- Page 7 3. The cover temperature of this equipment is 40-50 ℃ at work, do not touch the cover. 4. The internal components of the equipment must be purchased from the manufacturer. 5. When using controller, try to avoid signal interference sources (example: wireless intercom, high-frequency transmitter, etc.) 3.
- Page 8 Pan hall error Pan hall has error Description Software Present software version version Tilt Encoder Value The value increases when following original setting and decreases when moving from another Reset Pan calibration Enter sub-menu，reset for Pan/tilt motor direction. It shows the same value when passing a calibration can be adjusted to compensate the errors Tilt calibration...
- Page 9 Tilt hall error Tilt hall has error 50~200 Clockwise rotation, from fast to slow Color wheel does not color wheel hall or color wheel motor has error Counterclockwise rotation, from slow to fast 201~255 reset correctly Focus does not reset focus hall or focus motor has error Focus motor 0~255...