Network Monitor Signal Tower with MP3 NH-FV Series Instruction Manual - Amazon Web Services (AWS) Procedure - 3.Firmware confirmation method
3. Firmware confirmation method
Check if the firmware version is compatible with AWS IoT Core.
If the version is incompatible, refer to "3.2. Firmware update" ( ☞ page 7 ).
3.1. Firmware version confirmation method
Please change the network settings for the personal computer, so that
the personal computer can communicate with this product.
❶
Start a Web browser.
❷
In the Web browserʼs address bar, enter the IP
address* as set up on this product.
* The factory default IP address is 192.168.10.1.
❸
Enter the password* and log in.
* The default password is patlite.
❹
From the menu, click [Setup Menu] to expand the
menu tree.
❺
From the menu tree, click [System Configuration]
to display the setting screen.
❻
Check the version in the [Firmware Version].
* If the version is 1.12 or earlier, refer to "3.2.
Firmware update" ( ☞ page 7 ).
❷
❸
❹
❺
❻
6