Page 2 Operating/Safety Instructions IMPORTANT: Read Before Operating Equipment To avoid accidents or injury, keep work area clean, well lit, and well ventilated. Always wear eye, hand, and all other appropriate protective apparel when operating router. Keep all other people, children, and small farm animals away while operating router. Use only properly grounded, GFCI protected electrical outlet.
Page 3 Operating Instructions General Operation: Before placing the Router on your stone, make sure that the ● rubber base is cleaned of any debris that may be attached. Allow the router to overhang enough for the bit to clear the stone ●...
Page 4
Page 4 Installing/Replacing Bit: Note: This router is designed for stone and masonry applications exclusively. Use only diamond bits with 7/8 inch arbor hole and an M10-1.5 bolt. Place the router on table leaving clearance on the front for installing the bit.
Page 5 Troubleshooting Bit seems to be cutting slowly or not cutting at all? Suggestions: The material being cut may have “flattened” or “glazed” the diamond. Use a dressing stone or “green stone” to free the diamond. Router shuts off after a few minutes of use and/or fails to turn on at all.
Page 6 Ordering Replacement Parts Is your bit worn out? Want a spare? Give us a call and we will be happ y to take your order. A list of replacement parts is available through our website. Also see our website for ordering, pictures, How To information, videos, and more! Toll Free: 1 (888) 996-4777 Fax:...
Page 7
Page 7 See omegadiamond.com/062-714 under Attached Files for the most current Replacement Parts List.
Page 8 Limited Warranty For warranty information please visit our web site at omegadiamond.com/warranty Please record the Date of Purchase and the Serial Number of your machine here for future reference: Date of Purchase: Serial Number:...
Page 12
The Red Ripper, Red Ripper Router, and the Omega Diamond Logo are legal trademarks of Omega Diamond, Inc. All Rights Reserved. This Document may not be Copied or Distributed, in Part or in Whole, Manually or Digitally,...