Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Westcott FJ200 Strobe
- Page 1 FJ200 Strobe User Manual V1.0.2 12/21/2020 ...
-
Page 2: Table Of Contents
Canon Continuous Mode 4 Flashes Per Charge 4 FJ200 Strobe: Body Overview 5 FJ200 Strobe: Control Panel Overview 5 FJ200 Strobe: LCD Display & Menus 6 FJ200 Strobe: Warnings 7 FJ200 Strobe: Firmware Updates 8 Installing the Firmware 8 FJ200 Strobe: Getting Started 9 ... - Page 3 Enabling ‘Freeze Sync’ 13 Freeze Sync Flash Durations 14 FJ200 Strobe: Advanced Functions 14 Continuous Capture 14 FJ200: Settings Menu 14 Navigating the Settings Menu 14 Settings Options 15 FJ200 Battery: Performance and Care 15 FJ200 Battery Performance 15 ...
-
Page 4: Introduction
One last thing and this is the important one. Don’t forget that Westcott HQ is based in Maumee, OH and our team’s available to answer your questions, Monday-Friday 9am-5pm ET. We also have a community ... -
Page 5: Components (Included)
±3 TTL Flash Exposure Compensation (FEC) on the FJ-X2m Wireless Trigger or FJ80 Universal Speedlight is independent of the Flash Exposure Compensation (FEC) on the FJ200 Strobe. Meaning, a change of the FEC ±3 on the FJ-X2m or FJ80 will adjust the light output in TTL mode, however, the ... -
Page 6: Fj200 Strobe: Body Overview
FJ200 Strobe: Body Overview FJ200 Strobe: Control Panel Overview 5 ... -
Page 7: Fj200 Strobe: Lcd Display & Menus
FJ200 Strobe: LCD Display & Menus 6 ... -
Page 8: Fj200 Strobe: Warnings
FJ200 strobe temperatures will increase. Please use caution while using to avoid serious burns or injuries. ● Use only with the Westcott FJ200 Lithium Polymer Battery and/or AC Power Adapter and Cord. ● Do not touch the flash tube, LED modeling lamp, metal reflector, metal snoot, and other metal ... -
Page 9: Fj200 Strobe: Firmware Updates
FJ200 Strobe: Firmware Updates The FJ200 strobe is designed with a USB-C port to allow for firmware updates only (no charging). Future firmware updates could result in performance enhancements, modified menu options and menu layouts. It is strongly suggested that you visit ... -
Page 10: Fj200 Strobe: Getting Started
FJ200 Strobe: Getting Started Charging the FJ200 Lithium Polymer Battery Ensure the FJ200 is O FF by long-pressing the P ower | Test button until the LCD screen turns off. 2. Remove the battery from the FJ200 by sliding the release towards the rear of the FJ200 while ... -
Page 11: Fj200 Strobe: Mounting
Ensure the FJ200 strobe is O FF . 2. Remove the battery from FJ200. 3. Insert the 2-pin power cord in the FJ200 AC Adapter. 4. Align the metal contacts on the bottom of the AC Adapter to the pins inside the battery ... -
Page 12: Removing The Fj200 Metal Reflector & Modifiers
● Octagonal and larger umbrella shafts greater than 8mm will not fit into the FJ200 umbrella receptacle. FJ200 Strobe: FJ Wireless Communication Fully maximize the performance and features of the FJ200 by using the FJ-X2m Wireless Radio Trigger or FJ80 Universal Speedlight for dedicated wireless communication. ... -
Page 13: Fj200 Strobe: Exposure Modes
Exposure Compensation (FEC) of the strobe between -3.0 and +3.0 ( ±0.1 adjustments). NOTE: T he Flash Exposure Compensation selected on the FJ200 strobe screen is independent of the Flash Exposure Compensation controlled by the FJ-X2m Wireless Radio Trigger or FJ80 Universal ... -
Page 14: Enabling 'Normal' Sync
NOTE: Utilize HSS (see below) when choosing to use shutter speeds above your camera's maximum normal sync speed (typically: 1/200s, 1/250s, or 1/320s ). Enabling ‘HSS (High-speed Sync)’ Ideal for mixing a substantial amount of available light and flash when proper exposure with a shallow depth of field/wide aperture requires a flash sync speed above the camera’s maximum normal sync ... -
Page 15: Freeze Sync Flash Durations
○ Normal: 1/260~1/2600s ○ Freeze: 1/260~1/7000s ● Flash Duration (t0.5) ○ Normal: 1/800~1/8000s ○ Freeze: 1/800~1/20000s FJ200 Strobe: Advanced Functions Continuous Capture The FJ200’s incredibly fast recycling times allow for rapid burst up to 20fps (frames per second). NOTE: ... -
Page 16: Settings Options
5. Enable the settings option by quickly pressing the center C ontrol Dial o r by pressing the R eturn | Model b utton once. 6. Repeat steps 2-5 to make further adjustments or press the R eturn | Model ... -
Page 17: Fj200 Strobe: Technical Specifications
FJ200 Strobe: Technical Specifications FJ200: Strobe Maximum Power (Ws) 200 Ws Energy Range (Power Output) 9 f-stop (.8Ws to 200 Ws) Flash Duration (t0.1) Normal: 1/260~1/2600s Freeze: 1/260~1/7000s Flash Duration (t0.5) Normal: 1/800~1/8000s ... - Page 18 Power Source FJ200 Battery; Optional AC Adapter (sold separately) Battery Type Lithium Polymer Battery Capacity 36Wh, 2500mAh Voltage 14.4V Charge Voltage 16.8V Continuous Discharge Current 10A Max Charge Current ≤ 1.3A Max Charge Temperature 50° to 113° F / 10° to 45° C Discharge Temperature ...
-
Page 19: Warranty Information
Warranty Period, at its option and to the extent permitted by law, Westcott will either (1) repair the defect at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new or ... -
Page 20: Legal Information
: F.J. Westcott Co, 1425-B Holland Rd. Maumee, OH 43537 Legal Information Westcott products are made to the company’s traditionally high standards of quality and comply with all applicable government safety regulations and requirements. In an effort to provide the best quality ...
Need help?
Do you have a question about the FJ200 Strobe and is the answer not in the manual?
Questions and answers