Setting & Connection Cabling & Setup Verkabelung und Inbetriebnahme Make sure that the voltage of your power wall socket Stellen Sie vor Inbetriebnahme Ihres Lautsprechers fits to the voltage requirements of the speaker sicher, dass die Netzspannung mit der auf dem before switching on the system.
DSP Functions DSP ENCODER / CONTROLLER DSP ENCODER / CONTROLLER The encoder is an endless data wheel with push Der Encoder ist ein Endlos-Stellrad mit Drück-Funktion, function to enter menus and confirm settings. um in alle Menüs zu gelangen und Einstellungen zu Bestätigen. With this encoder the whole DSP can be controlled.
Page 5
Connection Panel MIC / LINE Switch MIC / LINE Schalter Switch, to adjust input sensitivity. Schalter zur Anpassung der Eingangsempfindlichkeit. If the switch is in position , the input Wenn sich der Schalter in Position befindet, ist die sensitivity is adjusted to line level. Eingangsempfindlichkeit auf Line-Level eingestellt.
Page 6
Connection Panel E 18 A SPEAKON für den Anschluss der Fullrange Lautsprecher und SPEAKON out to connect the full range speakers und den optionalen passiven Subwoofer and the optional passive subwoofer DSP CONTROL DSP CONTROL LCD display and buttons Button zur Einstellung aller DSP Einstellungen. to adjust all DSP settings.
Remote Control Software Input window with locked Outputs Output window Unlocked Output window (out A) Unlocked Output window (Sub out) Technical Data DSP DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing data Parametric Equalization 5 filters on input channel, selected as Bell, Low/High-Shelving variable Q...
Page 8
Technical Data / Drawings E 10 A E 12 A E 15 A 10"/1" multipurpose full range 12"/1" multipurpose full range System 15"/1" multipurpose full range 45 Hz - 20 kHz 40 Hz - 20 kHz 40 Hz - 20 kHz Frequency Range (-10 dB): 0°...