Taxa Outdoors Woolly Bear Assembly Instructions

Woolly Bear
Assembly Instructions

Tools Required:

•WD-40
•3/4" wrench
•3/4" socket wrench
•9/16" wrench
•5/32" allen wrench

STEP 1

•Keep trailer strapped to
pallet for safety
•Remove the tongue
assembly from the box stand

STEP 2

•Insert the tongue into the
main chassis
•Install two through bolts
with nuts on the sides.
(torque to 80 lb-ft)
•Install the black bolt on
bottom.
(flip the page for details)

STEP 3

•Rotate the tongue jack down
•Use the crank to raise the
jack. Remove the box stand
•Unstrap the trailer from
pallet and roll o pallet.
•Chock wheels

STEP 4

•Use socket wrench for
9/16"
nylocks, and
5/32"
•Install the risers in desired
position (Refer to diagram
for recommended riser
placement for weight
distribution.)
(flip the page for details)
allen for bolts
page 1/2