Advertisement
5.2.9.
Squeeze the riveter handles to compress the nut rivet. When the rivet has formed a retaining bulge
against the rear face of the sample (fig. 3) keep light pressure on the handles and screw in the mandrel (fig. 2.E)
until the handles are closed. Lock the mandrel in position by tightening the lock nut. All following rivets will be
deformed to the same degree when the handles are fully closed.
The setting applies only to the one rivet size and the one workpiece thickness - the test must be
repeated each time there is a change in nut size and/or workpiece thickness.
5.2.10. Unscrew the mandrel bar from the nut rivet by turning the knurled end of the draw bar body (fig. 2.F) and
then screw on a new nut rivet for the next operation.
6.
MAINTENANCE
6.1.
Keep all pivots lightly oiled.
6.2.
The jaw case assembly (fig. 4) should be disassembled, cleaned and oiled at regular intervals, depending on the frequency of use.
The need for cleaning/jaw (fig. 4.A) replacement will be indicated by the riveter failing to grip the rivet shaft.
7.
ALUMINIUM RIVETS
Aluminium threaded and pop rivets are available from your Sealey dealer.
Nut Rivets
Thread
AK396/2
M4 x 0.7
AK396/3
M5 x 0.8
AK396/4
M6 x 1.0
AK39602/1
M8 x 1.25
AK39602/2
M10 x 1.5
8.
SERVICE PARTS
The following service parts are available:
Part No.
Description
AK39602/05
Jaws
AK39602/26M4
Mandrel and Bar, M4 Nut Rivet
AK39602/26M5
Mandrel and Bar, M5 Nut Rivet
AK39602/26M6
Mandrel and Bar, M6 Nut Rivet
AK39602/26M8
Mandrel and Bar, M8 Nut Rivet
AK39602/26M10
Mandrel and Bar, M10 Nut Rivet
AK39602/9-3.2
Mandrel, 3.2mm Pop Rivet
AK39602/9-4.0
Mandrel, 4.0mm Pop Rivet
AK39602/9-4.8
Mandrel, 4.8mm Pop Rivet
AK39602/9-6.4
Mandrel, 6.4mm Pop Rivet (Small)
AK39602/9-6.4
Mandrel, 6.4mm Pop Rivet (Large)
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
Quantity
Sheet Thickness
50
0.5 - 2.5mm
50
0.5 - 2.5mm
15
1.0 - 4.0mm
10
1.0 - 4.0mm
10
1.0 - 4.0mm
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
fig. 4
A
Pop Rivets
AK99/1
AK99/2
AK99/3
AK99/4
AK99/6
AK99/7
AK99/8
sales@sealey.co.uk
e-mail
fig. 3
Quantity
Size
100
3.2(1/8”) x 6.2mm
100
3.2(1/8”) x 7.4mm
100
4.0(5/32”) x 8.0mm
100
4.8(3/16”) x 8.9mm
2000
3.2(1/8”) x 10.2mm
1200
4.0(5/32”) x 10.2mm
800
4.8(3/16”) x 10.2mm
www.sealey.co.uk
9A>
AK39602 - 1 - 160603
Advertisement
