Advertisement
5. CAlIbRATION CERTIFICATE
Test machine type/name
Test machine serial No.
Test machine calibra on date
Measurement error
1
Test
Test
%
Load
20%
5
60%
15
100%
25
2
Test
Test
%
Load
20%
0
60%
0
100%
0
Tool Model Number
Tool Serial Number
Tested by (print name)
4
Date of test
Notes:
1
Tes ng is in compliance with Interna onal Standard procedures, with test equipment calibrated by a
laboratory traceable to Interna onal Standards.
2
Measurement error shall be less than ¼ of the maximum permissible rela ve devia on of the torque
tool.
3
The observed values fall within the maximum permissible devia on (tolerance). For tools with a
flexible head, the result is valid only if the measuring axis is perpendicular to the axis of the tool.
4
This Sealey Declara on of Conformance is issued at the me of manufacture. Its' validity is open
ended un the torque tool is used for the first me. The default re-calibra on period of 12 months (o
5,000 cycles, whichever occurs first) starts a er first use of the torque tool (BS EN ISO 6789-1:2017,
clause 5.3 refers).
© Jack Sealey Limited
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste . All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment . When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations .
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice .
Important: No Liability is accepted for incorrect use of this product .
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim .
Sealey Group, Kempson Way, Suffolk business Park, bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
© Jack Sealey Limited
© Jack Sealey Limited
Declara on of Conformance
(in accordance with BS EN ISO 6789-1:2017)
TORQUE TESTER
4266
2018/6/20
2
±1%
Min Torque:
5
Max torque:
25
Tolerance ± 4 % of Test Load
Min
Max
4.80
5.20
14.40
15.60
24.00
26.00
Min Torque:
Max torque:
Tolerance ± 4 % of Test Load
Min
Max
0.00
0.00
0.00
0.00
0.00
0.00
STW101
John Li
01284 703534
Original Language Version
Original Language Version
Original Language Version
TORQUE TOOL
C AL IBRATION C E RTIFIC ATE
1
Measurement uncertainty
Ambient temperature
Humidity
Test units: (Nm, lb/ etc)
Clockwise
Completed test reading
1
2
3
An -clockwise
(This part 2 to be completed only where applicable)
Completed test reading
1
2
3
sales@sealey.co.uk
STW101, STW1011, STW102, STW103,STW104,
STW200, STW201 .V2, STW202, STW1012 (I)
0.031kgf.m
30
°C
59
%
Nm
3
4
5
Average
3
4
5
Average
Issue 4P 30/05/18
www.sealey.co.uk
Issue:5 (5) - 11/09/18
r
Advertisement
