Advertisement
Quick Links
Self-locking clevis hook
>IAGH, IMAGH<
>VAGH(S), VMAGH(S)<
Assembly instruction
This Assembly instruction/declaration of the manufacturer has to
be kept on file for the whole lifetime of the product.
TRANSLATION OF THE
ORIGINAL ASSEMBLY INSTRUCTION
This assembly instruction is valid in addition to the safety in-
structions for RUD Sling chains
(ICE-Nr. 7995555 or VIP-Nr. 7101649).
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
EG-Einbauerklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II B und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete unvollständige Maschine den
grundlegenden Anforderungen der Maschinenrichtlinie 2006/42/EG (Anhang 1) entspricht.
Die nachfolgend bezeichnete unvollständige Maschine darf, in der gelieferten Ausführung
erst dann in Betrieb genommen werden, wenn festgestellt wurde, dass die Maschine, in
die diese unvollständige Maschine eingebaut werden soll, den Anforderungen der EG-
Maschinenrichtlinie 2006/42/EG entspricht.
_____________________________________________
Produktbezeichnung:
Automatik-Gabelkopfhaken
_____________________________________________
IAGH / IMAGH / VAGH(S) / VMAGH(S)
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Die speziellen Unterlagen zur unvollständigen Maschine nach Anhang Vll Teil B
wurden erstellt und werden auf begründetes Verlangen in geeigneter Form übermittelt.
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, Funktion und Unterschrift Verantwortlicher
_________________
DIN EN 1677-3 : 2008-06
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
Self-locking
clevis hook
Simple inspection, administration and documentation
of work equipment and components
which must be inspected regularly
EC-Mounting declaration
According to the EC-Machinery Directive 2006/42/EC, annex II B and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the following incomplete machines correspond to the basic re-
quirements of the Machinery Directive 2006/42/EC (annex 1). The following incomplete
machine, in the delivered machine, may only be put into operation when the machine
in which the incomplete machine shall be assembled, has been tested according to the
requirements of the EC-Machinery Directive 2006/42/EC.
Product name:
_____________________________________________
Self-locking hook
_____________________________________________
IAGH / IMAGH / VAGH(S) / VMAGH(S)
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
The special documents about the incomplete machine according to annex VII part B
have been created and can be handed over in a suitable form on request.
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
Self-locking clevis hook
EN
Self-locking
clevis hook for
dump trucks
_________________
DIN EN 1677-3 : 2008-06
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for RUD IAGH Series
- Page 1 Verlangen in geeigneter Form übermittelt. Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing.
- Page 2 300°C up to 380°C minus 40 % Temperatures exceeding 380°C are prohibited! • RUD VIP self-locking clevis hooks must not be used Safety instructions with aggressive chemicals such as acids, alkaline ATTENTION so-lutions and their vapours. Wrong assembled or damaged lifting and •...
- Page 3 • The G-pin must be assembled captive with the slotted pin and with the step hole in the component (picture 4) • Use slotted pin only once! • Use only original RUD spare parts. • Check finally the correct assembly (see chapter 5 Inspection criteria). Pic 6: Component...
- Page 4 • Leave hazardous area when possible. Missuse • Watch always attached loads. • Read for all lifting/lashing means the RUD sling The following practises of the Automatic Clevis Hook chain Safety instructions for RUD lifting means are not permissable and have to be forbidden in any resp.
- Page 5 Make sure that..the load force in the straight strand is ... the hook will al- not twisted, and no ways loaded just in kinking or buckling the epulling direction occurs. The chain and that no bending strand must not be occurs (neither edge looped through the nor tip loading)
- Page 6 1.5 x WLL. for necessary skills. • Only RUD original spare parts must be used and At high dynamical loads with high number of load all repairing and overhauling operations must be cycles the bearing stress must be reduced acc.
Need help?
Do you have a question about the IAGH Series and is the answer not in the manual?
Questions and answers