Subscribe to Our Youtube Channel
Related Manuals for Smarteh LOC-1
Summary of Contents for Smarteh LOC-1
- Page 1 USER MANUAL Additional equipment LOC-1 Occupancy sensor Version 1 SMARTEH d.o.o. / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0) 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si...
- Page 2 Additional equipment LOC-1 Written by SMARTEH d.o.o. Copyright © 2016, SMARTEH d.o.o. User Manual Document Version: 1 September, 2016...
- Page 3 24 months is valid from the date of sale to the end buyer, but not more than 36 months after delivery from Smarteh. In case of claims within warranty time, which are based on material malfunctions the producer offers free replacement. The method of return of malfunctioned module, together with description, can be arranged with our authorized representative.
-
Page 4: Table Of Contents
Additional equipment LOC-1 Additional equipment LOC-1 1 ABBREVIATIONS................1 2 DESCRIPTION...................2 3 FEATURES..................3 4 INSTALLATION..................4 4.1 Connection scheme..............4 4.2 Mounting instructions..............7 4.3 Module labeling................9 5 TECHNICAL SPECIFICATIONS..............10 6 SPARE PARTS..................11 7 CHANGES..................12 8 NOTES..................13... -
Page 5: Abbreviations
Additional equipment LOC-1 1 ABBREVIATIONS Sorted by order of appearance in document: Light emitting diode... -
Page 6: Description
Additional equipment LOC-1 2 DESCRIPTION The LOC-1 is a 4 wire occupancy sensor used in combination with the input modules (e.g., LPC-2.I16, LPC-2.DI1, LPC-2.DI5, LPC-2.R01, LPC-2.R02) to detect moving person or object. LOC-1 uses PIR sensor for occupancy sensing and current protected bipolar transistor as a switching... -
Page 7: Features
Additional equipment LOC-1 3 FEATURES Figure 1: LOC-1 Occupancy sensor Table 1: Features Wide power supply range: 5 .. 32 V DC/AC Output voltage free contact Mounting with integrated magnets or screws Convenient enclosure for multi mounting possibilities 2 diagnose LED... -
Page 8: Installation
Power Supply = 5 .. 32 V AC/DC Option 2: No moving person or object present: voltage drop on sensor > 4 V. Moving person or object present: voltage drop on sensor < 1 V. Smarteh input modules (e.g., LPC-2.I16, LPC-2.DI1, LPC-2.DI5, LPC-2.R01, LPC-2.R02). - Page 9 Additional equipment LOC-1 Figure 4: Connection scheme with pull-down resistor +U = 10 .. 32 V DC R = 3 .. 20 kΩ Power Supply = 5 .. 32 V AC/DC Option 1: No moving person or object present: voltage drop on sensor > 95 % Vcc.
- Page 10 Additional equipment LOC-1 Figure 6: Connection scheme Table 2: Flying lead wires Yellow 5 .. 32 V AC/DC Power supply Brown Ground Green 5 .. 32 V DC (positive) NO voltage free contact White 0 V DC (negative) NO voltage free contact...
-
Page 11: Mounting Instructions
Mounting instructions: The occupancy sensor should be located on the position that provides maximum effect. 1. Mount LOC-1 sensor on the position with the magnets or screws . Magnets can be pushed to the other side of abutment surface if needed. - Page 12 Additional equipment LOC-1 Figure 8: LOC-1 orientation Figure 9: LOC-1 detection area...
-
Page 13: Module Labeling
• Label 2 descriptions: 1. S/N: LOC1-S9-1600000003 is the serial number. LOC1 – short product name, • S9 – user code (test procedure, e.g. Smarteh person xxx), • 1600000003 – year and current stack code, • 16 – year, •... -
Page 14: Technical Specifications
Additional equipment LOC-1 5 TECHNICAL SPECIFICATIONS Table 4: Technical specifications Power supply 5 .. 32 V AC/DC Consumption max. 15 mA Voltage free contact power supply 5 .. 32 V DC Output type transistor (NO) Output current max. 15 mA, internally limited... -
Page 15: Spare Parts
Additional equipment LOC-1 6 SPARE PARTS For ordering spare parts following Part Numbers should be used: LOC-1 Occupancy sensor, 2 m LOC-1 P/N: 204LOC16001001... -
Page 16: Changes
Additional equipment LOC-1 7 CHANGES The following table describes all the changes to the document. Date Description 30.09.16 The initial version, issued as LOC-1 User Manual. -
Page 17: Notes
Additional equipment LOC-1 8 NOTES...
Need help?
Do you have a question about the LOC-1 and is the answer not in the manual?
Questions and answers