Download Print this page

Advertisement

Quick Links

What's Included
Voice GPS Pro
Power Adapter and USB Cable
Manual
Functions

Advertisement

loading
Need help?

Need help?

Do you have a question about the Voice GPS Pro and is the answer not in the manual?

Questions and answers

Summary of Contents for GoCaddyGo Voice GPS Pro

  • Page 1 What's Included  Voice GPS Pro  Power Adapter and USB Cable  Manual Functions...
  • Page 2 Power (on/off) Slide the real power button to turn on/off. Red Light: "Enjoy your round", Green Light: "GPS is connected" Yardage Button 1. Proximity to hole Press the yardage button to indicate proximity to the center of green and distance to approach. Yardage Indication: "Green front 00 cener 00 yards"...
  • Page 3 (+),(-) Buttons 1. Volume - Press the (+)/(-) to adjust the volume. 2. Green Selection - Press and hold (+) for 2 seconds to choose green. 3. Measurement - Press and hold the (-) for 2 seconds to choose a measurement unit (Meter/Yardage)
  • Page 4 Field of Operation How to Operate 1. Turn on device and allow 10 minutes to activate GPS. 2. Select green, if necessary, by pressing and holding (+) button. 3. Press the yardage button to indicate distance while playing. 4. Device will indicate par number when approaching each tee box. GPS Reception (Automatic upon powering on)
  • Page 5 Charging, Battery Level Checking 1. Charging Methods Off and charge: Turn Voice GPS Pro off and connect to charger and check if LED is lit up. Two and a half hours will fully charge the battery and turns the LED into green or yellow indicating its stand-by status.
  • Page 6 PC Installation Go to www.emotiongolfcaddy.com, then click on "Downloads" tab  Download the software and install on the computer.  NOTE: All GPS comes with a preloaded maps. Only use the software to upgrade firmware or to update map data.
  • Page 7 PC Synchronization 1. Open Upgrade Manager program on your computer. 2. Connect USB to computer and turn “On” the gps. 3. Computer will detect it and the Upgrade Manager program will show the list of country on left side box. 4.
  • Page 8 5. It will ask to format the drive, click “Yes” 6. Click “Start” Formatting 7. Once it is done formating, click “Close” 8. It will download automatically. 9. After downloading. It will show “Download Finish”...
  • Page 9 10. Disconnect USB from computer – The Device display will shows “UP” and “OFF” and says “Good Bye”, then turn off the unit. *Make sure to deactivate the connection from your PC before unplugging the device from USB.