Page 3
The AstralPool SX Series blower is designed to provide years of trouble free use, excellent performance, and operate quietly. The soft density housing and foam insulation absorbs motor noise and vibration. Note: The appliance is not intended for use by young children or infirm person without supervision. Please ensure that young children are supervised to ensure that they do not play with the appliance.
Page 4
HURLCON SX SERIES BLOWER Gooseneck The blower should be installed in a dry location as close as possible to the spa but should not be installed within 3 meters to comply with electrical standards. To prevent damage to the blower and electric shock the blower must be installed at least 700mm above the highest water level in the spa (see fig 2).
Page 5
Should this be your requirements, contact AstralPool for further advice. An internal high limit cut out will shut the blower down if the air flow is insufficient to keep the motor cool. Once the motor cools, the high limit will reset and start the blower operation once again.
Page 6
A small amount of regular care and attention to your pool equipment will help ensure long life and trouble free performance. If the supply cord is damaged, it shall be replaced by Astralpool or its service agent or similarly qualified person in order to avoid a hazard.
Page 8
Record your Equipment details here for quick reference: Model No.: ____________________________ Serial No.: ____________________________ Fluidra Group Australia Pty Ltd, ABN 87 002 641 965 219 Woodpark Road Smithfield NSW 2164 AU 1300 763 021 INST 193 SX Series Spa Blower Vol 07-20...
Need help?
Do you have a question about the Fluidra SX Series and is the answer not in the manual?
Questions and answers