Subscribe to Our Youtube Channel
Related Manuals for Arec CI-403
Summary of Contents for Arec CI-403
- Page 1 CI-403 / CI-333 Network Camera User's Manual English AREC Inc.© All Rights Reserved 2019. l www.arec.com All information contained in this document is Proprietary...
-
Page 2: Table Of Contents
CI-403 / CI-333 Network Camera Table of Contents 1. Overview 1.1 Features 1.2 Package Contents 1.3 Dimensions 1.4 Connectors 2. Camera Cabling 2.1 Power Connection 2.2 Ethernet Cable Connection 2.3 Alarm I/O Connection 2.4 RS-485 Connection 3. System Requirements 4. Access Camera 5. -
Page 3: Overview
CI-403 / CI-333 Network Camera 1. Overview CI-403 / CI-333 Network Camera is capable of performing fast, reliable auto focus in 3x and 33x zoom ratio and can adapt to different scenes through its unique algorithm. As auto focus can be done by camera itself, no on-site focus adjustment is required. -
Page 4: Package Contents
CI-403 / CI-333 Network Camera 1.2 Package Contents Please check the package containing the following items listed below. Network Camera Power adapter Power Terminal Block Quick Guide 1.3 Dimensions The dimensions of the camera are shown below. CI-403 CI-333 98.21 98.21... -
Page 5: Connectors
CI-403 / CI-333 Network Camera 1.4 Connectors The diagram below shows the various connectors of the camera. Definition for each connector is given as follows. Camera’s Connectors PoE NETWORK ALARM IN ALARM OUT Micro RS-485 LINE IN LINE OUT Default... - Page 6 CI-403 / CI-333 Network Camera DC12V + AC24V 1 BNC Connector Power connection DC12V − AC24V 2 Power LED Power LED lights up when the camera is powered on. NOTE : It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to support long term continuous data read/write.
-
Page 7: Camera Cabling
CI-403 / CI-333 Network Camera 2. Camera Cabling Please follow the instructions below to complete the camera connection. 2.1 Power Connection Please refer to section Connectors. Alternatively, users can power up the camera by PoE if a Power Sourcing Equipment (PSE) switch is available. Refer to the section below for Ethernet cable connection. -
Page 8: Alarm I/O Connection
CI-403 / CI-333 Network Camera 2.3 Alarm I/O Connection The camera supports one alarm input and one relay output for alarm application. Refer to alarm pin definition below to connect alarm devices to the IP camera. 1. Alarm In 2 + ALARM IN 2. -
Page 9: System Requirements
CI-403 / CI-333 Network Camera 3. System Requirements To perform the IP camera via web browser, please ensure the PC is in good network connection, and meet system requirements as described below. Items System Requirement Minimum : 1. Intel® Core™ i5-2430M @ 2.4 GHz 2. -
Page 10: Access Camera
CI-403 / CI-333 Network Camera 4. Access Camera The default network setting of the camera is DHCP, which means IP is assigned by a router or any DHCP server. To log in to the administration web, please connect the camera and your PC / Notebook or a DHCP server. - Page 11 CI-403 / CI-333 Network Camera IP Address: 192.168.11.100 Subnet Mask: 255.255.255.0 Key in the camera’s IP address in the URL bar of the web browser window and hit on “Enter”. An access window will pop-up and ask for user name and password.
- Page 12 CI-403 / CI-333 Network Camera Once the Viewer is successfully installed, the Home page of the IP camera will be shown as the figure below. Viewer Window Main Tabs Language Selection Time Display Video Format Selection Live Video Pane Video Quality Info Button...
-
Page 13: Setup Video Resolution
CI-403 / CI-333 Network Camera 5. Setup Video Resolution Users can setup video resolution on Video Format page of the user-friendly browser-based configuration interface. Video Format can be found under : Streaming > Video Configuration. The default value of video resolution is as below. -
Page 14: Configuration Files Export / Import
CI-403 / CI-333 Network Camera 6. Configuration Files Export / Import To export / import configuration files, users can access the Maintenance page on the user- friendly browser-based configuration interface. Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the camera. - Page 15 CI-403 / CI-333 Network Camera 7. Tech Support Information This chapter will introduce how to delete previously-installed DCViewer in the PC and how to setup the Internet security. 7.1 Delete the Existing DCViewer For users who have installed DCViewer in the PC previously, please remove the existing DCViewer from the PC before accessing to the camera.
- Page 16 Step 3: Click on the <Security> tab, and select <Trusted sites> zone. Click <Sites> and <Add> the CI-403/ CI-333 to the Websites list. Step 4: Down the page, click on the <Low Level> button and click on <OK> to confirm the...
- Page 17 All information contained in this document is Proprietary Made in Taiwan Date : 2019.02.01 Version：1.0 AREC have the right to change or improve product specifications, without obligation to notify any user. Go to www.arec.com get the latest information related to the product or additional information.
Need help?
Do you have a question about the CI-403 and is the answer not in the manual?
Questions and answers