Cardinal Gates WSTP Assembly Instructions

ANTI TIP CABLE STRAPS
FOR SECURING HEAVY FURNITURE AND TELEVISIONS TO KEEP FROM TIPPING AND FALLING.
2X
A
2X
2X
[Machine screws for TV mounting]
Locate UPPER television VESA holes and
Never place TVs
1
mount though center hole with machine
on an unstable
stand. Stands screws.
that are not
2X
stable should
have an
additional set of
straps to secure
the stand to the
wall. When
anchoring to the
wall, the center
of a wall stud is
where the plates
should be
mounted. Always
drill a pilot hole
before using
wood screws.
NOTE: VESA mount, is a family of standards defined
by the Video Electronics Standards Association for
mounting flat panel TVs to stands or wall mounts.
Mount bottom plates of anti-tip straps to
3
furniture or to wall in the two outside holes
using wood screws.
Pusher
4X 4X
2X
[Wood Screws for mounting into wood]
TELEVISION ASSEMBLY INSTRUCTIONS
NEVER DRILL HOLES INTO THE TV.
4X
4X
4X
Fit cables from back of television to
2
furniture or to wall. Mark needed hole
location.
Tighten and eliminate slack in cables.
4
(SEE INSTRUCTIONS ON BACK)
2X
MODEL WSTP
MODEL 4PG
YOU WILL NEED:
⁄ "
1
8