Starting A Dishwashing Cycle - Zanussi Electrolux ZSF 6171 User Information

Starting a Dishwashing Cy-
cle
1. Check that the spray arms can turn freely.
2. Turn the water tap on fully.
3. Close the door.
4. Press the ON/OFF button.
5. Select the desired cycle.
The cycle indicator and the respective cycle stages
in the cycle progress display will be illuminated.
The remaining time expected for the cycle will be
shown in the multi-display.
The selected cycle will begin after approximately 3
seconds.
The current stage of the cycle is always shown in
the cycle progress display.
3
During the dishwashing cycle, the remaining
time shown in the multi-display may be adjust-
ed according to the size of the load, degree of
soiling, etc.
Interrupting or Cancelling a dish-
washing cycle
Interrupt a dishwashing cycle that is in progress if it
is absolutely necessary.
Interrupting the dishwashing pro-
gramme by opening the dishwasher door
1
Hot steam may escape when the door is
opened. There is a risk of scalding.
1. Open the door carefully. The dishwashing cycle will
stop.
2. Close the door. The cycle will continue.
Cancelling the wash programme
1. Press function buttons 1 and 2 and hold them
down.
The LED indicators of all the programme buttons
that can be selected will illuminate.
2. Release the function buttons. The wash pro-
gramme has been cancelled.
3. If you want to start a new wash programme, check
whether there is any detergent in the dispenser.
4. Switch off using the ON/OFF button.
3
Turning off the dishwasher will only interrupt a
selected dishwashing cycle, not cancel it. The
cycle will recommence after turning the dish-
washer back on again.
24