Blue Sign Switch - ACR Electronics AISLink CA2 User Manual

CA2 User Manual

1.3 Blue Sign switch

1.3.1 Installing the Blue Sign Switch
See the CA2 Installation Manual Section 2.3.6 (page 15) for wiring details. A latching
switch must be connected to the Blue Sign terminals in the rear of the CA2.
1.3.2 Activating a Blue Sign switch
For the Blue Sign switch to operate it must be activated in the system's Advanced Settings.
Settings System Advanced :
Ensure the check box for use Blue Sign Switch is checked.
Check the operation of the Blue Sign switch by checking the icon at the bottom of
the screen:
28/04/2020 Y1-03-0363 Rev. A 5